Torchlet has some of the most reliable and modern floor lamps out there, and their color-changing LED lamp has gained popularity in the past few years.
This is because the floor lamp can be controlled with Alexa voice commands, and there is a fabric shade for a modern appearance.
The floor lamp has been designed with dynamic and static scene modes that can accentuate the vibes of your place in an instant. Also, it can be synced with music or other content.
The best thing about this floor lamp is that it can be connected to the app for making personalized changes, such as the speed and brightness of the light.
However, there are some issues with this floor lamp, which brings us to common Torchlet floor lamp problems troubleshooting!
Common Torchlet Floor Lamp Problems Troubleshooting
- The Light Is Too Bright
If the light coming from your floor lamp is too bright, it can cause discomfort. In most cases, it happens when the floor lamp gets more wattage than necessary.
The only solution is to change the power socket that you are using because it can help you regulate the wattage flow to the lamp.
On the other hand, if this doesn’t work, you must get in touch with the electricity provider to optimize the wattage flow into your home.
If calling the electricity provider isn’t an option, we recommend that you install some fixtures in front of the lamp to create interference for the extra light.
- The Lamp Is Overheating
If the floor lamp is overheating, it’s likely that the lamp is connected to a damaged power socket – connection to a damaged power socket can cause overheating with the inflow of excessive power signals.
For this reason, the first solution is to change the power socket you are using to power the lamp.
However, if this doesn’t work, you have to change the power cord because an internally damaged power cord can be an issue.
Secondly, there are some other steps that you can take to prevent overheating, such as;
- First of all, you must comply with the installation guidelines of the floor lamp to optimize the temperature-related issues
- Make sure you don’t put the floor lamp in an area with limited ventilation and high temperature. This is because high temperatures can also limit the performance and functionality
- Avoid installing the floor lamp in confined areas because they prevent ventilation, hence overheating. So, make sure the LEDs on the lamp have sufficient air
- Make sure there is sufficient ventilation around the floor lamp
- Buzzing Noises Coming From The Floor Lamp
The floor lamp is supposed to produce light, but if it has started producing buzzing noises, it’s likely that the electric circuit of the lamp is overloaded.
For instance, if the lamp can only accommodate 400W lights, but you connect more than a 300W lighting system, it will produce a buzzing noise.
In most cases, the noise comes from the electronic parts of your floor lamp. For this purpose, we recommend that you check the floor lamp and its electric circuit.
If the electric circuit has an insufficient wattage, you need to get it fixed by an electrician. In addition, you could try reducing the number of LEDs on the lamp to avoid this issue.
- The Floor Lamp Is Displaying The Incorrect Color
Torchlet floor lamp has been designed with RGB LEDs, which are meant to show different colors. However, if the LEDs are imparting the incorrect color, there is something wrong with the wiring.
To fix this issue, we recommend that you check the wiring. If the wiring connections are loose or damaged, you must get them fixed to make sure the floor lamp illuminates the correct colors.
On the other hand, if there is nothing wrong with the wiring connections, we recommend that you check the LED controller.
We recommend that you disassemble the LED controller and look for loose connections. When you locate the loose wires, just reconnect them properly.
- The Light Is Too Dim
If the lights on your floor lamp are too dim, it’s likely that some LEDs on the floor lamp are damaged or have stopped working.
For this reason, we recommend that you inspect the LEDs on the lamp and look for the blackened ones. Once you identify the burnt LEDs, hire an electrician to get them replaced with new ones.
Keep in mind that LEDs on the floor lamp have extremely sensitive connections, which is why you should only hire an electrician to make the new connections.
The new LEDs are readily available at hardware stores or electricity stores.
If you have connected your floor lamp to the power source but the LED lights aren’t working, there are a few things that you have to check.
First of all, you have to check the contact of the LEDs with the holder. If the LED bulbs are loose, they need to be tightened to make sure the LEDs receive power.
Secondly, you have to check the dimmer switch connected to the floor lamp because using an incompatible dimmer can be an issue.
Another option is to check the fixture because a cold fixture will prevent the LED lights from turning on. So, touch the fixture, and if it’s cold to touch, let it run for a few minutes (the temperature will rise).
Some other points that you’ve to check include;
- If there was recently a power outage, it’s likely that the LED lights on the lamp were vulnerable to power surges, which burnt the LEDs
- Secondly, check the wiring for exposed cables and loose connections. If anything is wrong with the wiring, you must get it repaired to ensure sufficient power supply to the lights
- Thirdly, you have to check the environment for humidity because the LED lights are sensitive to moisture, and high humidity levels can cause the issue. So, if the humidity levels are high, change the location of your floor lamp
- LED Lights Are Flickering
Torchlet floor lamp has been designed with LED lights, and if they have started to flicker, it’s likely that something is wrong with the dimmer.
First of all, you should check the dimmer for loose connections. You have to ensure that all the cables to the dimmer are properly connected – the loose ones must be disconnected and reconnected properly.
Secondly, you have to check the voltage because insufficient voltage can result in LED lights flickering. So, check a voltmeter, and if the voltage levels are lower than the required value, you must get help from the electricity provider.
However, if nothing works, it could be a case of thermal runaway. When the heat generated by LED lights increases drastically, the lights will start to flicker.
In this case, we recommend that you turn off the floor lamp for a few minutes.
- Not Changing Colors Properly
The floor lamp is designed to change the colors according to the music or tones. However, if the floor lamp isn’t able to change the colors properly, it’s likely caused by the power source.
This is because the power source has to provide sufficient voltage for the LEDs to operate normally. So, check the driver and make sure you are using the correct one.
Secondly, you have to check the RGB controller because it must be set to the correct mode. If the controller is set to a static mode, it will keep illuminating one color only.
Thirdly, you must check the wires. If the wires are loose, they can show incorrect colors. So, check the wires and screw them in for tightening purposes.
On the other hand, if you are using the remote control, it’s likely that the batteries aren’t fully charged. If it’s been a few months since you changed the batteries, install new batteries in the remote.
- Poor Rendering Of Colors
If the color rendering in the floor lamp is poor, the colors won’t feel correct. In most cases, it’s caused by output issues with the light source.
The solution is to replace the old LEDs but make sure they’ve a high CRI.
Secondly, you must select the correct color temperature. This is because the light’s color temperature can directly impact the rendering.
So, make sure you’ve chosen warm or cool colors, depending on your preferences.
Thirdly, you have to check the LED chips for color correction. The chips have a phosphor coating that leads to a higher blue light.
So, if the light’s color is incorrect, the coating might be damaged and replacing the LED chips is the only solution.
- Too Much Glare
If the floor lamp is creating more glare than necessary, it’s recommended that you purchase a diffuser. This is because a diffuser can help spread the light in different directions.
Secondly, you should try putting the floor lamp far from yourself to make sure you aren’t exposed to glare.
The Bottom Line
A floor lamp is a reliable solution for people who want to uplift the ambiance in their homes. The troubleshooting guide from this article will help you use the Torchlet floor lamp without any issue.
However, if you need more help with the lamp, you must contact the customer support team for assistance!