Even though it has been making our lives easier ever since it was first introduced, the ORVIBO Smart IR Remote Control, which is a revolutionary device, still has some flaws that users encounter when they are attempting to put it to use.
Common ORVIBO Smart IR Remote Control Troubleshooting
In this article, we are going to discuss some of the most typical issues that may arise with the ORVIBO Smart IR Remote Control, as well as the solutions to these issues!
- The Remote Doesn’t Work With The TV
One of the most common problems people have been that their remote doesn’t work with the TV. There are a few different reasons for this:
- You need to press down on the remote for it to work.
- The TV might not be set up correctly. On some TVs, you’ll need to set your HDMI or AV mode in order for your remote to work.
- You may need an adapter or extender if you’re using a long HDMI cable.
- If you’re using an older TV, it might be that there is no voltage coming out of the HDMI port and you’ll need a power adaptor so that your remote can transmit a signal to your TV.
- Can’t Get The Remote To Connect To The Phone
The most common problem we see is that people can’t get the remote to connect to their phone. Here’s a step-by-step process for fixing this issue:
Make sure your phone has Bluetooth turned on, and make sure there’s nothing interfering with it. Follow these steps on your phone:
Go into your phones Bluetooth settings and make sure you have a Remote option in the list of devices.
If you don’t, then tap on Add New Device and follow all of the prompts until it finds your remote. Once found, tap Pair.
You should see a green check next to your device once it’s paired successfully! Now go back to the home screen, open up our app, and press CONNECT.
Now hold down any button on the remote control while waiting for it to vibrate.
If everything goes well you should see a Successfully Connected message pop up below your device name! Let us know if this solves your problem or not.
One of the most common problems is when your app keeps crashing. If you’re using a Bluetooth headset, try disconnecting it from your phone and then reconnecting it.
You can also check for updates to see if there’s a bug fix for the problem.
Finally, make sure that you’re not in an area where there are too many wireless signals. When this happens, the app will likely crash.
Trying to pair my remote but keep getting errors: When this happens, one possibility is that the batteries are low or dead on the remote itself.
Be sure they’ve been fully charged before moving forward and then resetting all devices within pairing range before starting again with fresh batteries on both remotes!
- Can’t Find The Code For My TV
If you can’t find the code for your TV, it’s possible that there are two codes for your TV. In this case, try inputting a different code first.
If that doesn’t work, input one of the other codes from the list and see if it works. If neither of this work, then it’s possible that your remote is actually broken and needs to be replaced!
Luckily, we have replacement remotes in our store at a great price.
- The Volume Buttons Don’t Work Sometimes
The volume buttons on your remote control may not work. This is usually due to a misalignment between the remote and your TV, or because there is a problem with your remote’s battery.
To fix this problem:
- Try re-aligning your remote by moving it closer or farther away from your TV.
- If this doesn’t work, you will have to replace the batteries in your remote control. A fresh set of batteries should solve the issue!
- The Buttons Are Unresponsive
The first thing to try is changing the batteries. If that doesn’t work, there are two possibilities:
- The device is out of range and you need to get closer or
- your remote has been paired improperly and needs re-pairing. To fix this, unplug your TV, wait 5 seconds, plug it back in and then try using your remote again.
- If that doesn’t work, turn off the power switch on your TV and let it sit for a few minutes before turning it back on.
- Once everything is turned on again, press any button on your remote control and if that fixes the problem, press STOP/PAUSE. Your remote should now be properly paired to your TV!
- Voice Assistants Not Working Properly
If your Google Assistant, Siri or Alexa isn’t working properly, there are a few things you can do.
We’ve put together a quick list of some common problems and solutions for those looking for help:
- Check that your device is turned on.
- If using an iOS device, make sure Siri is enabled in Settings > General > Siri.
- Make sure that Google Assistant is set up by opening the Google App and going to More Settings.
- Make sure you have not disabled remote control functionality in any settings on your phone.
- Check that your phone has cellular service and Wi-Fi connectivity.
- Your phone might be too far away from your home automation device for reliable connection. Move closer and try again.
- You may need to upgrade the firmware of your home automation device as it may be incompatible with Google Home, Siri or Alexa commands.
- Smart Timer Not Working Correctly
The first thing you’ll want to do is make sure that your batteries are fresh and making a good connection.
If they are, then there might be something interfering with the signal from your remote control, this can happen if there’s a lot of electronic equipment nearby, like TVs or microwaves.
You can fix this by turning off all nearby electronics and aiming your remote control straight at the unit in question.
Another problem could be that you’re trying to turn on/off a device that’s already on or off.
Make sure that you’re pressing On or Off on your remote control when it corresponds with what you want it to do.
- Very Hard To Set It Up
The most common problem with the ORVIBO Smart IR Remote Control is that it is hard to set up.
The first step in setting up your device is downloading and installing Smart Home on your phone.
Once you have installed this app, you will then be able to use it as a remote control for your ORVIBO Smart IR Remote Control.
However, if you are not sure how to install an app, then there are many tutorials on YouTube and other websites about how to download apps for free.
There are just two ways of connecting your phone wirelessly: through Wi-Fi or Bluetooth.
- The App Says I Don’t Have One Yet
If the app says that No devices found when trying to pair your phone to your ORVIBO Smart IR Remote Control, make sure that both devices are turned off before pairing them together.
You should also check whether or not both devices are within range of each other by moving them closer together until they both turn green.
Finally, make sure that after turning off one device and turning the other on, that they were turned back on within 30 seconds of each other; otherwise, the connection will break down.
- There’s A Lag When Using The Remote
One of the most common problems people have when using their remote is a lag.
This can be caused by a number of factors, including distance from the TV, obstructions in your line of sight, or other wireless devices interfering with your signal.
Here’s how you can fix this issue:
- Move closer to your TV and make sure there are no other objects blocking your path
- Remove any other wireless devices that may be interfering with your remote signal
- Try changing channels on your TV
- The Battery Drains Too Quickly
The most common problem with this device is that its battery drains too quickly. There are a few possible reasons for this:
- You have a faulty remote,
- The battery is not fresh,
- Your TV remote has too much interference from other devices. To fix it, try replacing the batteries or moving your TV remote away from any other electronics you may have in your house.
- The Remote Is Too Bulky
The remote is too bulky for one hand use and can be difficult to maneuver.
This problem can be solved by adding a ring grip or bumper guard so that users have a better grip on the remote while they are using it, especially when using one hand.
Also, many people with smaller hands have trouble pressing all of the buttons at once because they are spaced too far apart.
A solution for this problem would be to redesign the remote so that all of the buttons are in closer proximity, making it easier for people with smaller hands to press them at once.