10 Common FIBARO The Button Controller On-Off Trigger Problems Troubleshooting

common FIBARO The Button Controller On Off Trigger problems troubleshooting
common FIBARO The Button Controller On Off Trigger problems troubleshooting

FIBARO button is a battery-powered and compact button that allows users to control their home appliances and devices with a Z-Wave network.

It can be used to trigger different actions, and there is a panic mode, so you can get help in emergency situations.

It has a wireless communication feature and a small design, which makes it easy to mount on the wall of your home. In addition, it has AES-128 encryption that helps ensure top-notch security.

Common FIBARO The Button Controller On-Off Trigger Problems Troubleshooting

So, if you want to purchase this button controller for your smart home, it’s better to know about common FIBARO the button controller on-off trigger problems troubleshooting!

  1. The Controller Is Not Connecting To Wi-Fi

Wifi

FIBARO, the button controller, helps connect the smart and electronic devices in your home for easier control.

For this purpose, it is connected to Wi-Fi. However, if it’s not connecting to Wi-Fi, check the following;

  • First of all, you must ensure that the Wi-Fi network and controller are working on the same channel. Ideally, you should choose channel 1 to connect them
  • The second step is to reset the controller by pressing and holding the reset button for twenty seconds. Once the controller turns on, try reconnecting to the Wi-Fi
  • Thirdly, you have to check the power connection of the controller because it should be plugged into an active power socket

These three solutions usually help fix the Wi-Fi connection issue. However, if the problem persists, you should contact FIBARO customer support.

  1. FIBARO App Is Crashing

fibaro app

The FIBARO app is widely used to change the settings of the controller button. However, if the app crashes, you have to check the operating system of the smartphone.

For this purpose, you have to open the “general” tab from the settings of your smartphone. This tab will show if there is a software upgrade available. If the upgrade is available, you have to download it.

Keep in mind that once the software upgrade is complete, you must reboot your smartphone to make sure it’s configured properly.

In addition to updating the software version of your smartphone that has the FIBARO app, you have to reboot the controller button by disconnecting it from the power source for a few minutes.

  1. The Controller Is Not Working

controller

The controller button has been integrated with a pusher and a switch that helps turn on and operate the controller. However, if the controller is not working, you should check the continuity of the pusher.

The continuity can be easily checked with the help of a multimeter – you have to connect the multimeter’s probe to the pusher’s contact. If the reading is zero, it should be replaced.

On the other hand, if the pusher has enough continuity, it’s likely that the connections are either loose or broken.

To resolve this issue, you’ve to inspect all the connections and redo them (you can solder them in place).

  1. Controller Is Not Working With Alexa & Google Assistant

The controller button can be controlled with the help of voice assistants, such as Google Assistant and Amazon Alexa.

alexa

To begin with, you have to ensure that your voice assistant and the controller button are connected to the same Wi-Fi connection.

In case you are already using the same connection, try the following solutions;

  • First of all, you have to turn off your voice assistant and clear the cache and data of the smartphone app. For this purpose, you should go to the settings, open the apps tab, and scroll down to the voice assistant’s app. Then, just press the clear cache and clear data options
  • If clearing the data and cache doesn’t work, you should remove the controller button from the app and re-add it to make sure the connection is established and configured properly
  • The next solution is to reboot the smartphone that has the app of voice assistant. This is because it can clear the configuration errors, and the controller button will work
  • Lastly, you have to delete the voice assistant’s app because it might have a bug and reinstall the latest version of the app from the app store. Then, re-add the controller to the app and try using it again
  1. The Notifications Aren’t Working

notifications

FIBARO controller button has been designed with smart features, and the notifications appear on the connected smartphone app as well.

However, if the notifications are late or you aren’t receiving them, check the following;

Battery Level

First of all, you have to check the battery level of your smartphone. This is because the notifications don’t work when the battery level is less than 25%. So, recharge your phone.

In addition to recharging your phone, you have to recharge the controller button as well.

Registration

The controller button has to be registered properly to make sure the notifications pass through. To register the controller button, you should press it for a few seconds (the lights will blink).

Bluetooth

bluetooth

Bluetooth is an easy way of connecting smart devices. However, to make sure the devices connect and optimize the notifications, you must enable Bluetooth on the smartphone.

Background Apps

If too many apps are opened in the background of your smartphone, the notification issue will occur.

For this reason, you should clear the apps from the background and reboot the controller button.

  1. Bluetooth Connection Doesn’t Work

Bluetooth is an essential technology to connect the smartphone app and controller button. So, if the Bluetooth connection doesn’t work, try the following steps;

bluetooth device

  • Turn off the Bluetooth on your smartphone and turn it on after a few minutes
  • The second option is to change the Bluetooth channel and make sure both devices are connected to the same channel
  • The third solution is to remove other devices that are connected to the same Bluetooth channel. It will ensure that the channel isn’t overloaded
  • Last but not least, you have to disconnect the controller button from the smartphone and reconnect it to the app (you can use Bluetooth)
  1. Battery Life Is Limited

The controller button is usually powered by the battery. However, if the battery life is limited, there are specific tips that can help maximize the lifespan of the battery.

battery life

First of all, you should disable the fingerbot when the controller button isn’t in use because it can limit the battery’s lifespan.

On the other hand, if you tend to push the controller button more than ten times a day, it’s better to get rid of batteries and connect the button to the power outlet properly.

Lastly, you have to install the controller button in places where the temperature doesn’t keep fluctuating rapidly. This is because temperature fluctuations can drain the battery.

  1. Not Sticking

The controller button can be attached to the wall, but if it’s not sticking, you should focus on the following points;

clean

  • First of all, make sure the surface you have to use is free of debris and dust. This is because these particles can damage the adhesive, which prevents the bond
  • Before you attach your controller button to the wall, make sure you wipe clean the residues properly
  • The surface you have to use must not have any ridges and bumps – it must be smooth. That’s because an uneven and rough surface can prevent the adhesive. If there are some bumps, use a sandpaper
  • If nothing works, you can try applying a stronger adhesive by yourself. The easiest solution is to apply the double-sided tape
  1. Controller Button Keeps Falling Off

If the controller button is attached to the wall, but it keeps falling off, you have to press it firmly to the surface to make sure the adhesive doesn’t come off.

On the other hand, if the adhesive is already damaged, it’s recommended that you use double-sided tape to make sure it attaches properly.

Another solution is to take off the controller button and attach it to a flat surface because it helps press it down in place. Also, there must be no debris or dust on the surface.

  1. It Gets Stuck

stuck

If the controller button is getting stuck and you aren’t able to push it properly, it’s likely that the dust and dirt have built up in the mechanical parts – it can prevent the buildup.

For this reason, we recommend that you use cleaning wipes and rubbing alcohol to make sure the dust and dirt are cleaned up properly.

On the other hand, if there is no dirt or debris, you should check the battery because a low battery can prevent you from turning on or pressing the button.

So, if you’ve been using the controller button for months and haven’t changed the battery, it’s time to purchase new batteries.

However, do consult the manual to determine which batteries are recommended.

Conclusion

conclusion

On a concluding note, these are a few common problems with the controller button, and we have mentioned beginner-friendly solutions.

In case you have some other issue, you should call the FIBARO support team at the helpline to get a professional repair service!

Leave a Comment