The versatility and mood-setting features of LED lights are what make them the perfect choice for a secondary light source.
As long as you’ve proper lighting installed in your home, grabbing a few sets of LED light strips will help you enhance the ambiance of your room.
Most of the owners like to pair up these lights as a secondary light source in the entertainment room.
If you’re in the same boat and looking for something to help you with the management of the lighting system, going with smart LED light strips will serve you well.
You’ll enjoy a more immersive lighting solution, and the LED light strips are pretty affordable.
So, there is no harm in experimenting with different LED light strips. The majority of brands in the market bring a decent value to the owners, and you can take a look at the reviews for a better idea.
Govee is one of the best entry-level options if you’re not trying to go over the budget. However, a common concern with these LED lights is whether or not you can cut them to size.
So, if you’re also unsure about cutting Govee LED lights, the following information is for you.
Can You Cut Govee LED Lights?
Just like all of the brands in the market, you can cut the majority of LED light strips if you follow the proper cutting instructions.
Even though LED light strips offer you a lot of freedom, you still need to stick with the defined cutting sections while installing the Govee lights.
So, keep that in mind if you’re trying to cut Govee LED lights. According to the experts, you will find a cutting section after a margin of three LED lights. The cutting section will have yellow connectors that can be used to link up the lights with the power source.
You can only cut the lights within these sections, and if you freely cut between other parts of the LED strips, they will stop working. So, yes, you can cut Govee LED lights as long as you’re cutting the right sections.
If you try cutting only one LED, there won’t be any connectors to power up the unit, and you will ruin the whole patch. For this reason, you should go over the cutting instructions before trying anything with the LED lights.
One of the things that you need to keep in mind is that you can’t pair up LED strips from different brands together. Moreover, the length of the strip should also match the requirements brought forward by the power adapter.
If you ignore the power status of the unit and try to extend the unit beyond its capacity, be sure to expect some errors down the road.
So, we suggest that you stick to the recommended length and don’t go overboard by connecting multiple pieces to a single adapter.
Other than that, some models from Govee are not designed to be cut. If you’re purchasing the RGB light strips, then they can’t really be cut to fit your desired size.
So, the model number plays a huge role in determining whether or not Govee LED light strips can be cut to different sizes.
If you’re unsure about the model of the Govee lights you’re using, try to engage the dealer and have him help you with the identification. He will guide you properly on whether or not it is a safe idea to cut Govee LED lights.
Ideally, if there are no golden marks on the LED light strips, it is better to go over the owner’s manual before cutting the strips.
On the other hand, if you do find the cutting marks and there are proper instructions available in the owner’s manual regarding the connection of the cut pieces, then you should experiment with a single piece.
That way, you won’t have to worry about wasting the whole set. So, it all boils down to the model you’ve purchased and the presence of cutting marks on the Govee LED light strips.
How Do You Reconnect Govee LED Lights After Cutting?
You will need to rely on four-pin connectors to reconnect different cut sections on your Govee LED lights.
So, once you’ve removed a few sections from the LED light strips, use the four-pin connector to attach the power source or an additional section to extend the LED strips.
These connectors are necessary to transfer power through the LED strips when a section is damaged. For this reason, make sure to have the four-pin connectors ready when you’re cutting the Govee LED lights along the golden sections.
Even if you’ve accidentally damaged the LED light strips while trying to cut them into different sections, it is not that hard to fix the set by removing the defective sections.
All you need to do is to find the closest cutting marks and then remove the damaged parts.
Now, you can use the 4-pin connector to reattach the working sections, and then the whole LED light strip will start working.
Issues with the lights not working after cutting can also be linked to the power adapter.
You need to make sure that you’re not using the wrong type of adapter and that the length of the strip is optimal. It is not that rare for owners to try and connect multiple strips with the same adapter.
So, if you’re struggling with a few damaged sections on the Govee light strips, make use of the connectors and remove the defective sections.
You can’t do much to fix them, and it is just better to remove them from the system.
On the other hand, if you received damaged units out of the box, then you need to reach out to the dealer. The delivery process can be pretty harsh on smart devices.
This is especially true for fragile units like Govee. Even with all the padding and bubble wrap, the unit can get damaged sometimes.
However, you are not liable for any of these damages. Instead of trying to fix the lights yourself and compromising on the length of the unit, you need to ask the dealer to send you a new one.
Most of the Govee dealers will be more than happy to provide you with a fresh piece.
Sometimes, you won’t even have to show proof of purchase, and the dealer will verify everything on his end.
From there, you can expect to get the new unit within the same week. Hopefully, it won’t cost you much time, and you will be able to secure a decent response from the new device.
Similarly, if you’re struggling to get your hands on a fresh piece, then you need to reach out to the dealer about this issue.
Your main focus should be on informing them about the warranty complications.. They will help you get a fresh piece even when the dealer is not cooperating.
Hopefully, you won’t have to go through all of this hassle, and the new light strips will be delivered to you soon.
Wrapping Up
These were some of the more common things that you need to keep in mind when you’re struggling with the Govee light strips. Most often than not, you won’t have to bother with anything when cutting and reconnecting the Govee lights.
However, if you’re not too sure about the lighting status, try asking the dealer.
There are some models from the Govee brand that can’t be cut. So, if you’re using older models that have no cutting marks, it would be better if you don’t experiment with these options.
On the other hand, if you’re sure that there are visible cutting marks on the unit, then you can cut these lights pretty easily.
It all comes down to the presence of the cutting marks, and you can further confirm the cutting procedure by referring to the manual.
You’ll find complete details on how to connect and set up multiple lighting strips. Just be sure to stick to the recommended length, and don’t go overboard with the lighting setup.
Most of the time that will be it, as you’re trying to adjust the power-related errors from the system..
Hopefully, you won’t have to go through any more hassle while trying to set up the Govee lights.