The Braeburn units aren’t great when you’re looking for the latest smart features, but these units are second to none when it comes to pure functionality.
These units will serve your home perfectly when you’re looking for consistent performance. Moreover, you won’t have to go through complex programming guides just to set up these units in your household.
So, if you’re thinking of purchasing a digital thermostat for your household, then Braeburn is your first option. The owners can benefit from predefined programs for each time of the day and also manually set the desired temperature by turning off these programs.
It only takes a few seconds to update programmed configurations, and here is how to turn off the program in your Braeburn thermostat.
Braeburn Thermostat Turn Off Program
When you’re thinking of turning off the program on the Braeburn Thermostat, you can either disable it temporarily or permanently hold the manual configuration.
It all comes down to your cooling or heating requirements, and you don’t have to go through any long procedures to turn off the program on the Braeburn unit. To temporarily disable the program on the Braeburn thermostat, just use the temperature buttons on the right side of your thermostat and update the current settings.
Updating the current temperature settings will turn off the program until the next cycle hits the timer. You will also see the “Day” symbol flashing above the timer that will indicate that your program has been overridden for a brief time. You won’t have to worry about the configurations setting back to the programmed configurations until the timer hits the next cycle. So, if you’re only thinking of bypassing the timer for a brief moment, just update the current thermostat setting.
On the other hand, if you wish to turn off the program indefinitely, then you need to make use of the hold option. All you need to do is to update the current temperature settings and then press the hold button on the bottom-left section of the screen. This will put up a hold symbol next to the temperature on the thermostat, and you won’t have to worry about the configurations resetting to programmed settings again.
Usually, this hold is permanent, but you can also modify the user options to switch the hold settings to 24 hours only. So, if you wish to update the commands for a single day, then you will have to first update the hold configurations in the user settings and then turn on the hold feature again. This will be enough to update the hold settings, and your unit will start working perfectly with the new thermostat settings.
Overall, the Braeburn program can be turned off by updating the temperature on the unit and then using the hold feature. You have complete control over the holding time, and this thermostat will bypass programmed configurations until you turn off the hold feature manually. It only takes a few seconds to bypass the program, and you can easily update all configurations with the press of a button. So, go over the programmed settings on the unit and then update the current temperature to avoid issues with the cooling.
What To Do If The Hold Feature Keeps Resetting?
One of the more common problems that some users pointed out was that the new configurations kept resetting even when the hold feature was turned on. This problem with the thermostat can be traced back to power issues in the unit, and you need to check for a battery replacement. If the battery in your unit wasn’t replaced for an extended period, then now is a good time to get new batteries for your thermostat.
Once the batteries on your unit are replaced, you should also reset the thermostat for good measure, and it would be enough to get the unit working without any configuration issues. Make sure to also seek help from the customer support professionals if the hold feature doesn’t work perfectly, and the confirmations keep resetting to default settings. It can be pretty annoying when you have to update the cooling configurations on the unit every time you try to access the thermostat. So, just engage the customer support members and have them help you with the device.