BISSELL steam mops are a good choice for cleaning your home. They offer a deep clean and can be used on all types of floors, including carpets. These mops are easy to use and come with a variety of features that make them ideal for cleaning your home. Most BISSELL steam mops have a built-in water tank that heats the water to the correct temperature for cleaning. They also have a steam control knob that allows you to adjust the amount of steam released. BISSELL steam mops are safe on all floors, including hardwood, laminate, tile, and vinyl. When using a BISSELL steam mop on carpets, it is important to follow the manufacturer’s instructions for the best results. It is a convenient way to clean your home and can be used on a variety of floor types. However, a few steaming issues have been reported while using the BISSELL brand. If you’re encountering a similar situation, continue reading to learn how to fix it.
A few common reasons why the BISSELL steam mop stops working include:
- The water tank is not filled to the appropriate level.
- The mop pads are too dirty.
- The unit needs to be descaled.
- The water tank is damaged and needs to be replaced.
- The steam unit is not working properly and needs to be replaced.
If your BISSELL steam mop is not steaming, here are a few things you can do to troubleshoot the issue.
How to Fix BISSELL Steam Mop Not Steaming?
- Plug-In Unit
The steam mop should be plugged into a 120-volt AC power outlet. If it is not plugged in correctly, the steam mop will not work. To make sure the socket is working, plug something else, such as a lamp, into the outlet.
- Dirty Mop Pads
If the mop pads are too dirty, they will not absorb the steam and dirt from your floors. To clean the mop pads, remove them from the steam mop and wash them in warm water. Let them air dry before putting them back on the steam mop. Dirty mop pads interfere with the steam mop’s performance. If your BISSELL is not steaming, check the pads and make sure they are clean.
- Fill Water Tank
First, check that the water tank is filled to the appropriate level and that the unit is turned on. If the problem persists, try descaling the unit according to the instructions in your user manual.
- Descale the Unit
If your BISSELL steam mop is still not steaming, you may need to descale the unit. Fill the water tank with a 50/50 mixture of white vinegar and water and run the mop until it runs out of steam. Be sure to rinse the unit thoroughly afterward to remove any vinegar residue.
- Replace the Water Tank
If your mop still will not steam after descaling, it is possible that the water tank is damaged and needs a replacement. You can purchase a replacement tank from the BISSELL website or a local retailer.
- Check Steam Unit
If the water tank is full and your BISSELL steamer still will not generate steam, there may be an issue with the steam unit. Try running the mop without the floor pad to see if steam is being generated. If no steam is coming out, descale the unit according to the instructions in your user manual. If this does not fix the problem, the steam unit will need to be replaced. Replacement steam units are available for purchase on the BISSELL website. To get a replacement, you will need the model number of your steam mop. This can be found at the bottom of the unit.
- Check the Heater
The heater may not work properly if your BISSELL steamer is not generating enough steam. First, ensure the water tank is full, and the unit is turned on. If the problem persists, try descaling the unit according to the instructions in your user manual. If this does not fix the problem, the heater will need to be replaced.
- How to descale a BISSELL Unit
Follow the following steps to descale a BISSELL unit.
- Fill the water tank with a 50/50 mixture of white vinegar and water.
- Run the mop until it runs out of steam.
- Rinse the unit thoroughly afterward to remove any vinegar residue.
- Repeat if necessary.
- Adjust Steam Settings
The BISSELL steam mop has two steam settings: high and low. If your floors are not clean enough with the low setting, try using the high setting. Conversely, if your floors get too wet with the high setting, try using the low setting.
If your BISSELL steam mop is still not steaming, you may need to replace the steam unit. Replacement steam units are available for purchase on the BISSELL website. A replacement will cost you around $60. To get a replacement, you will need the exact model number of your steam mop.
How To Prevent BISSELL Steam Mop Steaming Issues:
To prevent your BISSELL steam mop from having steaming issues, follow these tips:
- Fill the water tank.
- Do not overfill the water tank.
- Descale the unit regularly according to the instructions in your user manual.
- Replace the water filter every 3-6 months.
- Use distilled water in the water tank.
- Do not use tap water.
- Clean the mop pads regularly.
- Remove the mop pads and wash them in warm water when they get dirty.
- Be sure to let the mop pads air dry completely before putting them back on the steam mop.
- Check that the steam unit is not blocked by dirt or debris.
- Clean the steam nozzle if it becomes clogged.
- Never use the steam mop on unsealed floors.
- Use the steam mop only on sealed hard floors such as ceramic, tile, linoleum, and laminate. Do not use it on carpets or rugs.
- Do not use the steam mop without the floor pad.
- Be sure to attach the appropriate floor pad to the steam mop before using it.
- Do not use the steam mop with a damaged floor pad.
- If the floor pad is ripped, torn, or otherwise damaged, replace it with a new one.
- Use only BISSELL replacement pads with your BISSELL steam mop.
We hope this information was helpful. If you have any additional questions, please feel free to ask in the comment sections.