When you’re comparing top-tier sprayers, Bissell Proheat will always come out on top, and you won’t find a better option when it comes to carpet cleaners. This cleaner is known for its excellent performance and incredible durability. The customer response has been overwhelmingly positive over the past few years with this sprayer. So, if you’re looking for a new unit, make sure to stick with Bissell Proheat.
The only complaint that some users have to deal with due to ignored maintenance is with the Bissell Proheat not spraying. This issue will only present itself when you’re not careful about the sprayer usage. So, if your unit is not spraying, go through some of the fixes mentioned here.
Bissell Proheat Not Spraying Fix:
- Remove Tool
Try starting the troubleshooting process by checking the condition of the tool. You can remove the tool at the end of the hose to inspect this component for clogging issues or damaged sections. If you’re not having any trouble with the water flow after removing the tool, then you need to get a new tool for your unit. A damaged tool will only create more problems in the future, and it is simply better to stick with a robust system over the long run.
- Inspect Unit For Clogging Issues
If the tool seems to be in good shape, and no solution will come out of the spray at this stage, then you need to check the hose for possible clogging issues. Make sure to extend the hose completely to eliminate minor kinks in the hose, and then check the response from the trigger.
If the hose is not damaged, removing the kinks should help you streamline the water flow through the system. So, turn off your machine for a few moments and completely extend the hose to address these problems.
- Use A Paperclip To Clean Sprayer
At this stage, you should inspect the sprayer tip for possible errors. After months of consistent use, it is not that rare for this spray tip to get clogged. So, you will need to make use of a paper clip to clean the sprayer. Make sure to be gentle with the tip and carefully insert the paper clip into the sprayer to remove clogged debris.
You should avoid damaging the trip as that will result in excessive use of the formula. So, be precise and gently clean out the sprayer to avoid further issues with the machine. Hopefully, you won’t be disappointed by the performance of your unit when using this paperclip.
- Fix The Pump Belt
The pump belt can also be at fault when you’re unable to isolate the issue with the hose or the attached tool. So, your next move should be to turn off the device and flip it over to access the pump belt. You can find a red cover over this pump belt that will help you narrow down issues with Bissell Proheat. So, simply remove the screws attached to this red cover and then check the situation with the pump belt.
If the belt is in good shape, you will need to align it properly to isolate the issue with your machine. However, if the belt is damaged, you have no choice but to get a replacement through the official Bissell support. It won’t be too difficult to get your hands on a fresh piece, and the new piece is usually pretty affordable.
- Check Motor Shaft For Damage
A damaged motor shaft can also cause issues with the sprayer, and you need to check the condition of the shaft next to the belt to find the exact issue. If the motor shaft seems to be in rough condition, you might have to take your unit to the nearest repair center. You won’t be able to fix a broken motor yourself, and it is usually a better idea to leave this job to the professionals.
- Restart Your Machine
Sometimes, to fix the Bissell unit, you just have to let the air out of the system by turning it off for a few moments. If the issue is not that serious, just turn off the machine for a few minutes and then turn it on again after a few minutes. That should be enough to let the air out of the system, and you can check the response from the sprayer after pressing the trigger a few times.
- Attach The Tank Properly
The issues with the tank placement can’t be understated, and you need to isolate the errors with the machine when the tank is not properly connected. First, you should check the placement of the cover over the water tank and then inspect the position of the water tank on the cleaner itself. So, you should adjust the latches on the tank cover one more time and then reseat the tank on top of your unit.
- Check Response From The Trigger
There is always a possibility that you’re dealing with a defective trigger. If the trigger is not engaging all the way, just clean up the sides a bit and check the response from the trigger one more time. This issue with the trigger usually presents itself after the unit has been stored away for several months. So, if you’re in the same situation, make sure to clean up the trigger section, and that should be it when it comes to the Bissell Proheat spraying issues.
- Call Bissell Service Center
If your purchase is recent, just take the unit to your nearest Bissell service center. There is no need to waste hours of your time trying to narrow down the issue. So, just call Bissell support and have them help you with the issue.
- Get A Replacement
The warranty policy on Bissell Proheat is pretty decent. You can get a replacement if the unit is defective. So, instead of opening up the device yourself, let the professionals take care of this issue. That way, you won’t have to worry about voiding the warranty, and you can get a fresh piece in no time.