Bissell is the top brand when it comes to reliable cleaning units. However, the reviews on its hose are not that great. Owners often complain about kinking issues when using this unit.
So, you’ll have to be extra careful to make optimal use of this cleaning device. Aside from these hose-related issues, this unit is very durable and will last you for years, if not decades.
You just have to keep track of its maintenance and the status indicators to keep it in good shape.
Users can sometimes get confused about the Bissell garage pro empty water tank light being on.
This is usually a common indicator that helps owners keep track of the water levels inside their units.
However, if you’ve noticed a sudden drop in suction power, there might be something wrong with your unit. Just follow through with some of these fixes.
Bissell Garage Pro Empty Water Tank Light on
- Empty Dirt Tank
The first move should always be to empty out the tank. Even if you were sure to clear it out a few hours ago, there is no harm in cleaning it one more time.
Make sure that there is no gunk or residue left inside.
It is always a good idea to cycle water through the system a few times every week. This will free up the clogged dirt, and you will be able to get the empty water tank light to turn off.
- Clean Filters
The filters in all Bissell systems are great and help you with years of consistent performance.
However, you will notice a massive drop in the consistency of these units when you ignore the maintenance of this device. The filters should be replaced every few weeks.
Depending upon the frequency, the filter life can vary by a huge margin. So, if the workshop is a bit too rough, try to replace the filters frequently.
You can also choose to rinse out these filters once every few days. That would surely improve the performance.
However, it is always a better idea to get new filters to avoid these minor errors with Bissell systems.
- Try Power Cycling Your Machine
Power cycling the machine is always a good option when you’re not sure that the condition of the tank itself is decent.
So, just remove all power connections from your unit for a few minutes. After about five to ten minutes, you can turn on the device again.
It will take a few seconds for this Bissell unit to become functional, but you’re not left with many choices here.
So, isolate the issue to minor programming bugs, and then power cycle your machine.
- Check Suction Status
You will also see activity from the empty tank indicator when the suction status is poor.
If the unit does not bring enough suction power to your device, just check the power status and hose for obstructions.
Fixing the suction power would have a direct impact on this issue. So, try to isolate errors with the suction power and remove kinks from the hose.
Hopefully, that will be it when it comes to the indicator light errors.
- Limit Water Levels
Sometimes, the water level in the main tank is too high. While having enough water in the tank is good for the cleaning performance, you will still have to stick to an optimal level.
Overfilling the tank will only clog up the system. So, if you’re in the same boat and overfilled the tank, try to limit the quantity of water inside the tank.
Just adding half as much water to the tank will be enough to help you narrow down the issue.
- Check For Cracks
At this point, the probability of a cracked unit increases by a huge margin. If you’re in the same boat with the Bissell unit, just claim the warranty.
You’re not left with many options at this stage, and a new tank is the only viable solution. If you’re sitting on a valid warranty, it shouldn’t be that difficult to grab a replacement.
So, just thoroughly inspect your device for cracks and then call the dealer to help you with these errors.
Ideally, that will be more than enough to help isolate all the tank-related issues. However, if there are no cracks on the tank, your solution might be at fault here.
Furthermore, the possibility of a defective cleaning unit also increases by a good margin.
- Make Sure You’re Not Using An Off-Brand Solution
The issue might also be with the type of solution you’re using in the tank. You can rely on many cleaners from the market or create your own with vinegar.
However, you will have to perfect the consistency of this solution.
Otherwise, the situation with the Bissell Empty water tank light is imminent. You can test out a different solution to narrow down the issue here.
If the light turns off with a different solution, you’ll be sure that the liquid is at fault here.
On the other hand, if the issue is persistent and not related to the liquid, then you’ll be sure that your device is defective.
Sadly, you can’t fix the unit yourself. So, you’ll have to reach out to the official support team.
- Get Help From Official Support
The reputation behind this unit might not be amazing, but owners are more than happy with its customer support.
Bissell maintains a complete panel of customer care experts to help owners through any and all issues.
So, try reaching out to these experts. They will make the troubleshooting process effortless for you.
Wrapping Up The situation with the Bissell Garage Pro empty water tank light on indicates normal operations of the unit.
You just have to clean out the tank and cycle water a few times to isolate this issue. Usually, the situation is not that serious!
However, if the tank is damaged or the suction power is low, try to change filters, power cycle the unit, and remove kinks from the hose. Hopefully, the issue will be fixed right here.