8 Easy Solutions To Bissell CrossWave Not Charging

The BISSELL CrossWave is a cordless multi-surface cleaning machine. It can vacuum and wash your floors simultaneously, making it a great choice for busy households. The CrossWave comes with two brush heads – one for carpets and one for hard floors – so you can use it on any flooring in your home. It also has a detachable handheld vacuum and cleaner, so you can use it to clean upholstery and stairs. The machine is easy to use and has clear instructions, so you can start cleaning immediately.

The BISSELL CrossWave is a versatile cleaning machine that can quickly work dirt and grime on any type of flooring. It is convenient and has all the necessary accessories to start cleaning immediately. If you are looking for a cordless multi-surface cleaner that can vacuum and wash your floors, the BISSELL CrossWave is a great choice. However, there are a few reports of users struggling with charging it. If you’re also struggling with something similar, continue reading to find out what the issue occurs, how to resolve it, and, more importantly, what steps you can take to prevent this issue from occurring in the future.

A few common reasons why the BISSELL CrossWave stops charging include:

-The power cord is not plugged in securely.

-There is a problem with the outlet.

-The battery needs to be replaced.

-The vacuum is too clogged up.

If your BISSELL CrossWave stops charging, try these troubleshooting steps to get it working again.

BISSELL CrossWave Not Charging Fix:

1. Plug Power Cord Securely

If your BISSELL CrossWave has stopped charging, you should check the power cord first. Securely plug into both the machine and the outlet. If it is not, unplug it and plug it back in again. Once done, check to see if the machine will start charging. If it does not, there may be a problem with the outlet. To check this, plug another appliance into the outlet to see if it is receiving power. If it is not, there may be an issue with the circuit breaker or fuse box. You should check the battery next if the outlet appears to work properly. If the battery is old, you will have to replace it.

2. Charge for a Minimum 4 Hours

Let it charge for a minimum of 4 hours to ensure the battery is fully charged. The charging time is usually between 4-5 hours. Leave the vacuum on a charge, and don’t turn the charging off until the green light is visible. While the vacuum is charging, try not to operate it.

3. Unplug the Vacuum

If everything looks fine, try resetting the vacuum by unplugging it and then plugging it back in. If unplugging the vacuum doesn’t work, you may need to replace the battery.

4. Restart Vaccum: 

If your BISSELL CrossWave still isn’t charging, try restarting the vacuum. To do this, switch off the vacuum, then unplug it. Next, plug it back and switch it on again.

5. Check Battery:

If the power cord and outlet are both working and the vacuum is plugged in securely, but the BISSELL CrossWave still isn’t charging, you may need to replace the battery.

6. Replace Battery:

If you’ve tried all of the above troubleshooting steps and your BISSELL CrossWave still isn’t charging, you may need to replace the battery. To do this:

1. Unplug the vacuum and remove the battery cover.
2. Remove the old battery and insert a new one.
3. Replace the battery cover and plug in the vacuum. You can find replacement batteries online or at your local hardware store.

A battery replacement will cost you around $30, which is a reasonable purchase.

7. Unclog the Vacuum:

If the Vacuum is too clogged up, it interferes with the normal functioning of the machine. Consider unclogging it by removing and cleaning all the parts, especially the brush roll. To properly unclog the vacuum, follow the following steps:

8. Turn off the Vacuum

To turn off the vacuum, follow the following steps:

• Unplug the power cord from the outlet.
• Remove the dirt bin by pressing the release button and lifting it off the vacuum.
• Press the brush roll release button to remove the brush roll.
• Compressed air blows out that is caught in the brush roll’s bristles.
• Replace the brush roll by lining up the tabs on the brush roll with the slots on the vacuum. Push down until you hear clicks
• Put the dirt bin back on the vacuum.
• Plug the power cord back.
• Turn on the vacuum.

If your BISSELL CrossWave is still not charging after trying all the above troubleshooting steps, you will have to take it to a professional electrician who’s certified in repairing houseware gadgets,

You can find a list of authorized service centres on BISSELL’s website.

Or you can contact BISSELL’s customer service team at 1-800-237-7691 for additional suggestions that may help you fix the issue.

To prevent BISSELL CrossWave from encountering charging issues, follow these tips:

-Avoid operating the vacuum while it’s charging; otherwise, it will reduce the battery life.

-Keep the vacuum cleaner by emptying the dirt bin and cleaning the brush roll regularly.

-Use only BISSELL batteries and power cords.

-Clean the vacuum regularly to prevent it from becoming clogged.

-Replace the battery every 1-2 years to ensure optimal performance. The average battery life is around two years.

-Keep the power cord and charging base clean and free of debris.

-Avoid leaving the vacuum plugged in for an extended period when not in use. Extensive charging can damage the vacuum.

-Store the vacuum in a cool, dry place because heat and humidity can damage the battery.

-Never operate the vacuum without the filter in place. A filter helps to protect the motor and keeps the vacuum running smoothly.

-Ensure the power cord is plugged into the charging base properly; otherwise, a loose connection can cause charging issues.

By following these tips, you can help ensure that your BISSELL CrossWave will continue to charge properly and provide optimal performance for years to come. Thanks for reading!