It is not that rare for even the most reputable brands like Bissell Carpet cleaner to run into problems with the spray hose. You will sometimes struggle with the cleaner not spraying any water. Luckily, this spraying issue is usually not that serious. It is pretty easy for most users to get ahead of these problems by checking the condition of the tank and the spray tip.
If you’re sure that there are no serious hardware issues with the tank, you will be able to fix the device in no time. So, there is no need to get alarmed about this situation. Just follow through with the methods mentioned in this troubleshooting guide.
Fixing Bissell Carpet Cleaner Not Spraying:
- Refill Tank
Refilling the tank should be your first move with the Bissell carpet cleaner, as this issue is mostly related to an empty tank. So, even if the outer bladder seems to be filled with dirty water, make sure to refill the tank with freshwater or solution.
That should help you get ahead of the spraying issues if you take proper care of the cleaner. Ideally, the problem will be fixed at this stage, and you won’t have to think about going through more troubleshooting methods.
- Re-seat Water Tank
If you’ve just bought the unit, then the issue with the Bissell cleaner will be related to the placement of the water tank. Check the situation with both latches to make sure that your tank is adequately assembled. If the latches seem to be in good shape, just remove the tank from its seat and then place it properly one more time.
Make sure that you’re not able to pick up the tank by simply pulling on the handle. If the tank does come off when you pull it up, then it was not seated properly. So, try going over the manual instructions one more time to isolate the issue with the Bissell carpet cleaner not working.
- Check The Condition Of the Water Tank
The condition of the water tank should be the next thing that you need to isolate with the Bissell carpet cleaner. If the tank is damaged, then that is likely why you’re not able to spray any solution through the unit.
Unfortunately, you’re not left with many options when it comes to a damaged tank. So, make sure to go over the condition of the tank one more time to isolate the issue with your unit. Hopefully, you won’t have to bother with more issues when addressing the situation with the Bissell carpet cleaner not spraying.
- Fix The Placement Of the Pump Belt
The placement of the pump belt can also play a massive role in this issue. You have to fix the placement of the pump belt to isolate the problem with the Bissell carpet cleaner. If the issue is truly with the placement of the pump belt, just readjust the belt and then screw everything back in its place to get ahead of the problem.
The pump belt can be accessed through the bottom of the machine. You need to turn off the device entirely and then turn it upside down so that the brushing side is facing towards the ceiling. From there, just remove the screws on the access door to remove the cover. You should be able to address the situation with the pump belt at this point with the Bissell carpet cleaner.
- Replace the Pump Belt
There is also a possibility that the pump belt is damaged, and you need to replace this pump belt to isolate the issue. You won’t be able to spray any water if the belt is not correctly connected to the motor. A damaged belt will not work with your machine, and you will have to call the dealer for a replacement. Most of the time, this replacement is pretty cheap, and you need to install a fresh piece to isolate this issue with the belt.
- Clean Spray Tip
If you’re lucky, the issue might just be a clogged spray tip, and you need to remove the tool to access the sprayer tip. You can use any small pin to unclog the spray tip, and it won’t take you more than a few minutes to clean up the tip properly.
So, simply check the condition of the spray tip and clean it up a bit. Hopefully, that will be enough to streamline the flow of solution through the tool, and you won’t have to bother with more issues when it comes to Bissell cleaner not spraying any more water.
- Check The Condition Of the Water Hose
A damaged hose can also restrict the flow of water through the unit. You won’t be able to get any water through the hose when it leaks out of the hose. So, after refilling the tank, make sure to check for leaks when you try to use the spray feature. If the water is not spraying through the tool, but you can still see leaking water on the carpet, then you’re likely struggling from a similar situation.
Depending upon the damaged sections, you will have to either replace the tool or the hose assembly to fix the flow of water. Make sure to get compatible replacements from the official support members when dealing with these issues.
- Get Help From Official Support
At this stage, you should be able to narrow down the exact issue with the machine. However, if you’re not that lucky, and the issue with your unit persists, then calling customer support might be the only solution. You can’t do much about a damaged unit, and getting a replacement will help you address these issues. So, try and call the company number or your Bissell dealer to address the issue.
Most of the time, the issue is with an empty tank, and you won’t have to worry about spending hours trying to fix the problem. So, make sure to simply check the tank before you move towards the pump belt or the hose connection.