Having a battery door lock makes up for a secure experience as these will operate even during a power outage. Still, this does mean that you won’t run into any kind of trouble when trying to use these door locks.
That being said, we have seen plenty of concerned users share their experiences regarding their battery lock not working for some reason.
For helping any such users who seem to have been facing this problem, we will be listing down some of the most common ways this issue can be fixed. Here is what you should know regarding this problem:
Fixing Battery Door Lock Not Working
- Replace Batteries
Most of the time, any issues with a battery door lock are usually caused when it is running low on juice. So, the first thing that you can make sure of is whether the battery on your door lock is charged or not.
After ensuring the charge on your battery, we strongly advise that you keep it charged. Though it can be that your batteries need a full replacement. If that is so, then be sure that you get supported batteries for the door lock.
- Try Resetting
Apart from replacing the batteries on the door lock, you can also try checking for any possible issues with the settings on your device. However, if you don’t seem to have any idea what might have gone wrong with the door lock, then try resetting the device.
Keep in mind that the reset process might differ according to the model of the door lock that you have. This is why you should always refer to the user manual guide which should have further instructions on how you can reset your door lock.
- Possible Obstruction
You should also check the door as well as the hinges to ensure there isn’t any kind of possible obstruction between these. More specifically, you have to make sure that your door is properly closed before you can engage the locks.
Besides the door, it is also worth checking if your door lock is properly secured at its place. There could be something that is interfering with your door lock’s working. In such cases, you have to remove any such thing.
- Poor Installation
Another reason behind your door lock not working could have something to do with how you have installed the device. It is possible that you haven’t installed the door lock correctly due to which it is having a hard time engaging with the door.
Under such circumstances, we strongly advise that you try reinstalling the door lock. If you seem to be struggling with the process, you can keep the manual guide with you and refer to it whenever you get stuck during the process. Similarly, after you have installed the door lock, go through its setup again once you have reset the lock for optimal results.
- Getting it Checked
In case the issue still seems to persist, then we highly recommend that you get your unit checked. There’s a good chance that you are facing some kind of technical fault on the lock which can’t be fixed by following a bunch of troubleshooting steps.
Instead, you will need to call in professional help on the matter and ask them for help. This way, you should be able to get your door lock repaired. However, if the unit is already beyond repair, then the only thing left would be to get a full replacement of the unit.
The Bottom Line:
Don’t have any idea why your battery door lock is not working? To resolve any such problem, you can try several steps which are all mentioned in detail right above. While you should start with the battery itself, there’s no telling whether you have a hardware problem or not unless you troubleshoot it. So, make sure that you follow all the instructions that we have laid in the article.