The B-Hyve by Orbit is a great device for helping you water your lawn smartly and efficiently. Through the B-Hyve app, you can easily set up schedules at which you can water your lawn.
This is an affordable unit, and you won’t have to go over budget with this option.
On the other hand, if you’re not that worried about the budget and need a unit that will keep you served with the best performance on the market, then Rachio is the brand for you.
The only good thing about B-Hyve compared to Rachio is the price point, and you can expect some issues here.
Similarly, there can be times when you will notice the smart watering feature not working. If you have also experienced the B-Hyve smart watering not scheduled issue, then you have come to the right place!
Using this article, we will be explaining everything that you will need to know to learn how you can get rid of this issue. So, without wasting any more time, let’s get started!
Fixing B-Hyve Smart Watering Not Scheduled
- Check the Configurations
If you are having issues with the scheduling feature, then the first thing that you will need to check is if you have configured the unit properly. You might have set more than one timer, which can end up causing issues with the zone.
For optimal results, you can try following the instructions that have been mentioned in the user manual to get it fixed. However, it is also worth mentioning that in certain cases, you may run into a hardware issue that can also cause such issues.
- Power Cycle The System
The next best thing that you can do is power cycle the smart system. It won’t take you more than a few minutes and will address the majority of errors with the unit. So, if you’re not too sure about the unit, be sure to go through the power cycle routine.
It will get rid of all of the programming errors, and you can go through the scheduling features one more time.
You just have to remove all power from the unit by isolating the power connections. Keep the power removed for around five minutes.
From there, you can reconnect the power connections and then allow the device to turn on over the next few minutes. You won’t have to go through any configurations, and the unit will pick on the schedules as usual.
So, be sure to check the response from the unit the next day. You’ll surely be able to narrow down the errors with your smart device in no time. Hopefully, the issue will be fixed right here, and you won’t have to go through any more errors.
One mistake that most owners make is that they will simply go through the reboot routine. You won’t be able to get through the issue by following the reboot routine.
You will have to completely remove the power from all the connections and then start the unit again.
- A Reset Might Be In Order
Next, if you’re not lucky with the power cycle routine and the issue is still there, then we suggest that you go forward with a reset. It might seem like an extensive task, but you’re not left with many options at this point.
So, follow through with the reset, and that will remove all of the configurations from your device. You will have to go through all of the settings one more time. However, a reset is a surefire method of fixing all of the programming errors.
Once the reset is completed, you will have to define the schedules one more time. That would usually be it, and the new schedules will start working without ever running into any of these errors.
- Check For Hardware Issues
Hardware issues are also pretty common when you’re dealing with this unit. It is not that rare for this fragile unit to get damaged during delivery or installation.
Either way, you need to claim the warranty and get yourself a fresh piece. There is no point in wasting your time with a broken one.
All you have to do is to reach out to the dealer and explain the situation to him. He will verify your purchase and send you a replacement within the same week. Some dealers will take a bit long for the verification process.
So, be patient and reach out to the official customer support if you do run into minor issues with the system. Hopefully, these experts will be able to streamline the process for you, and you will be able to get the new unit in no time.
- Checking the App
Another thing that you will need to check is your smart app which could also be one of the prime reasons behind the schedule not working. Though to properly check if that is the case, you will have to start by inspecting if your app is properly paired and set up.
We also recommend that you check your schedule settings under the app, just in case. Alternatively, you can try reinstalling the whole app, which might be able to help you solve the issue. Before you do, we recommend clearing the cache and data files of the app.
- Firmware Issue
Plenty of users who were facing this same issue reported how it was being caused as a result of having outdated firmware installed on their unit. More specifically, it seemed that their device came with an older version, which needed to be refreshed.
As these companies like to roll out updates now and then, keeping the firmware updated to the latest version resolves the problem. This is why we recommend you do the same thing and update your firmware’s version.
- Contacting Support
There’s also a chance that you are facing a more technical issue that will need the help of some professional. If that is so, then your best bet would be to get in touch with the support team.
After letting them know about the issue, they will access your system and verify all the settings and configurations that you have set up.
Similarly, if you weren’t able to update the firmware on your own, they should help get it updated to the latest version. Once they are done, you should no longer face any more issues with the B-Hyve.
- Getting It Checked
If you are still facing the issue, then it is likely that you have a faulty product. Still, you can give it one last try and get it checked through a local repair shop. If they are unable to repair the device, then your only option would be to get it fully replaced.
Unfortunately, opting for a full replacement is bound to cost you quite a few bucks. So, you should be willing to spend a few dollars, as you can even try going for a different option altogether.
The Bottom Line:
In most cases, the reason why you may have your B-Hyve smart watering not scheduled is due to the firmware. This is why getting in touch with the support team should effectively help get rid of the issue, as they should be able to update the firmware.
Still, if your issue persists, then feel free to try all the other troubleshooting steps that we have mentioned above in the article! You can avoid the majority of these errors by having the unit professionally installed.
That might be a bit heavy on your budget, but you will be able to avoid hours of hassle.
So, if you’re in a situation with the unit not responding to any input, then going with an expert is a better idea. There is no point in going cheap after spending money on the purchase of a smart unit.
You might damage the unit during installation, and the response from the device won’t be optimal. Hopefully, you won’t have to worry about the schedules after the local contractor is through with the installation.