Having your doorbell chime act up all of a sudden can be a pretty frustrating thing to deal with. Especially when you don’t have any idea about how you are supposed to get it fixed, this can turn into quite a concern.
That being said, certain Arlo users have been found complaining about their doorbell chime not working at all. This brings us to today’s topic where we will be sharing a complete guide on how you can easily fix this issue.
So, if you wish to get rid of such an error, here is what you can do:
Fixing Arlo Doorbell Chime Not Working:
- Issues with the Power Kit
Most of the time, any issues caused by the Arlo doorbell are caused because of the power kit. More specifically, what usually happens is that there is some sort of poor installation or configuration that may cause such an issue to surface.
Though if you are encountering a similar issue on your end, try following these steps:
- First, you will have to locate your chime box and ensure that it is installed near the doorbell.
- Now, try turning off the power directly through the circuit breaker as a precaution.
- Once you have the power turned off, attempt to open up the cover of your chime box and check the wires. You can use the guide found on the Arlo app for learning how you can set these wires up.
- After you are done with the wires, just make sure that you place your power kit inside the chime box.
As the chime box should be successfully installed again, all you have to do is to check whether it starts working by turning it on.
- Power Source Issue
Another major reason behind the doorbell suddenly stopping working is if the power is not sufficient. There can be many causes because of which your doorbell isn’t getting any power at all. For instance, it could be that a fuse might have blown near where you have installed the doorbell.
Similarly, there’s also the possibility of incorrect voltage being used. It should be kept in mind that these doorbells only seem to support voltages that are about 16-24V AC. Lastly, you should also check if a breaker might have flipped inside your circuit breaker. Ensure that your doorbell is receiving power.
- Incompatibility Issues
There’s also a good chance that you might be using an incompatible chime box with your Arlo doorbell. In such cases, you won’t be able to get it to work as there are certain features that only a few doorbell chimes will support. This can be true in particular if you are using an existing chime with your doorbell.
Though there are still certain ways through which you can confirm if your doorbell supports. For instance, in case your chime box is powered only through batteries then it won’t fully support your video doorbell.
- Getting Help From Professionals
If you are still having a hard time getting your issue resolved, then you can try asking for help. You can either get in touch with any local professional or try contacting the support team. Either way, you should have a much better chance of getting this whole issue fixed for good.
It is also worth mentioning that you might have a faulty device because of which you are currently facing issues. In such cases, the only feasible solution would be to get the whole device replaced with a newer model.
The Bottom Line:
Is your Arlo doorbell chime not working? Typically, this occurs when your doorbell isn’t compatible with your chime. Though if you are sure to be using a compatible device, then it is likely that you might be dealing with some sort of issues with your doorbell. It is suggested to start with checking the power kit and power source of the doorbell and ensure there is nothing wrong with either of these.