6 Fixes: ALC Video Doorbell Button Does Not Activate Mechanical Chime

alc video doorbell button does not activate mechanical chime
alc video doorbell button does not activate mechanical chime

The best thing about the ALC video doorbell is that you don’t have to subscribe to any monthly service. It barely takes a few minutes to install this unit, and you won’t have to hire an expert to help with the programming. Moreover, the pricing on this unit is too good to pass when you compare the value with other brands.

So, if you don’t have the budget for brands like Ring, then going with ALC is not a poor option. It is true that you will come across some issues like the unit not activating the mechanical chime, but that doesn’t mean that your unit is defective.

Most of the time, you will be just dealing with bad wiring, and following these solutions will help you fix the ALC video doorbell button if it does not activate the mechanical chime.

How to Fix “ALC Video Doorbell Button Does Not Activate Mechanical Chime”

  1. Verify Voltage Output From The Power Source

The Voltage output from the power source is one of the primary reasons why your ALC video doorbell button won’t activate the mechanical chime. The voltage requirements can vary depending upon the model of the chime you’re using in your household, but you’ll be sticking somewhere around 8 to 24 volts for the unit.

So, you need to grab a multimeter and check the output from the power source. If the voltage output doesn’t match this requirement, you need to either change the power source or get new wires for your chime. Try to go through the manual if you’re not sure about the exact voltage requirements of your doorbell.

  1. Clean Debris Behind Button

The debris behind your ALC video doorbell button can also play into this situation where the chime won’t respond to any input. If you’re in a situation where the chime doesn’t take any input from the button specifically, then you need to clean out the doorbell.

Debris is blocking the connection points from making contact, and you need to use an air blower to clean the button. Otherwise, you will keep running into the same complications with the video doorbell.

  1. Replaced Damaged Wires

It is always a good practice to check the electrical connections once every year. Otherwise, you will keep running into situations with damaged appliances. If you’ve not checked the wiring connections for your chime in a while, then it is entirely possible that you’re dealing with damaged wiring.

The only fix for this situation is to grab some replacement wires. Even if the wires are slightly frayed or kinked, you should go with the safer route and replace them immediately. This won’t only save you from a fire hazard, but you will also enjoy enhanced performance efficiency from this unit.

  1. Use Cleaner To Wipe Rust From Connection Points

Sometimes, even when the wiring seems to be in good shape, you will run into complications with corroded connection points. Not many users give attention to the condition of the connection points as they are trying to narrow down this issue with the ALC video doorbell button not activating the mechanical chime.

So, if the connection points between the doorbell and the chime are rusty or seem to be in poor shape, try to turn the power off from the breaker and clean them up.

  1. Check Connection With The Digital Adapter

If you’re sure that there are no compatibility-related issues, then checking the digital adapter should be your next move. You have to make sure that the digital adapter connected to the mechanical chime is fully operational, or it won’t receive any input from your video doorbell.

So, if the issue is not fixed at this stage, then verify the integrity of the doorbell.

  1. Reset ALC Video Doorbell Once

Lastly, resetting the video doorbell is your only move left if it is not fixed after trying the majority of these solutions. The reset method is only valid for programming-related issues and won’t serve you if there are hardware issues with the unit.

So, before resetting the unit, make sure that the hardware is in good shape. If you’re not that experienced in verifying the integrity of the electrical connections, it is a better decision to hire an expert. That way, you won’t have to spend as much time in the troubleshooting process.

Leave a Comment