When you’re looking for affordable security units, options like Wansview will always present a decent value because of their feature-rich cameras. You will enjoy easy integration with the existing smart home setup. However, it is not all sunshine and rainbows with the Wansview cameras. There are a ton of concerns regarding the saving issue with these cameras where the Wansview units won’t save to a local storage device.
Most often than not, this issue with the Wansview camera not saving is related to the SD card and not the camera. So, you’ll have to first look at the storage device for possible issues before you move towards the unit itself. Here are a few methods to help you along your troubleshooting journey.
Wansview Camera Not Saving Fix:
- Check SD Card Formatting
SD card formatting is the first thing that you need to check when the Wansview camera is not saving. It is a crucial step, but many owners forget to reformat their SD cards before putting them in the camera. So, simply connect the SD card to your PC, and then right-click on the storage driver properties to proceed with the formatting.
You need to use the FAT32 format and then confirm your selection to initiate the formatting process. It will just take a few seconds, and you can reinsert the SD card back into the camera, and it will start saving your recorded videos.
- Replace The Corrupted Card
Sometimes, it is a better idea to use another card and don’t rely on a storage device that is corrupted. You won’t be able to get any response from a corrupted device, and replacing it is the best move. Try to purchase the new SD card from brands like SanDisk, as they maintain a good reputation for their storage devices. Hopefully, these cards will last you for years before you run into any other issues with the device.
- Check For Port Damage
Port damage can always be a problem, even when your storage card is perfect. So, just make sure to check the condition of your camera before reinserting the card. Using an air blower to remove excess debris from the port will help you with the saving issue. However, if the condition of the port is pretty rough, then you can’t do much about the issue yourself. Try taking your camera to the nearest repair center and have it fixed by an expert.
- Remove Old Files From SD Card
Even though the Wansview camera can cycle through storage clips, you should always try to remove old files from the SD card when it is full. It is not a bad idea to purchase a better card with better storage capacity in this situation.
Ideally, you need to create a backup on a different drive to make sure that the storage doesn’t fill up in the SD card. That way, you won’t have to worry about these issues where the Wansview camera won’t save new clips onto the storage device.
- Try Resetting The Wansview Camera
Resetting the camera might not always be the best option for most users, but you’re not left with many options at this point. So, just proceed with a factory reset routine and try inserting your camera one more time. That should be enough to help with the saving issues if you’re sure that the SD card is in good shape. Hopefully, you won’t have to bother with more fixes, and the Wansview camera will start saving updated clips.
- Reach Out To Official Support
If the issue is not fixed even after going through all of these troubleshooting methods, then you need to reach out to official support. There is something wrong with your camera, and you should get it replaced immediately. It will take a few days to secure a replacement, and you won’t have to go through much hassle to secure a replacement if the claim is indeed valid.
Overall, the issue is mostly related to the SD card and not the camera itself. So, make sure to isolate the issue with the SD card before you reset the camera. Ideally, the issue should be fixed once you reformat the SD card and try using it with your camera one more time.