Nothing is more annoying than dealing with cable issues when you’re trying to connect your entertainment system to the display. This is especially true for Sylvania TVs, as they maintain a pretty bad reputation when it comes to connectivity issues. So, if you’re also struggling with detection issues where Sylvania TV is not detecting PS4 HDMI, then you’re not alone.
There have been many complaints about this issue with the Sylvania TV, and you can go through several troubleshooting methods to help with this situation. The majority of the time, your cable will be at fault, but you can still test out these methods to improve your understanding of the problem.
Fixing Sylvania TV Not Detecting PS4 HDMI
- Reconnect Your PS4
Reconnecting the PS4 is a pretty simple fix that helped many users address problems with the HDMI not being detected by the Sylvania TV. So, if you’re sure that the condition of the HDMI port and the cable itself is decent, just focus more on reconnecting your PS4 device.
You might just be dealing with a minor bug that can be addressed by reconnecting your PS4 to the unit. So, before anything else, try to remove the HDMI cable from the port and then connect it again to check the response from your TV. It should be able to recognize the console if the hardware is in good shape.
- Check HDMI Port
The HDMI port can also be at fault here when the Sylvania TV is not detecting PS4 HDMI. There is nothing that you can do yourself about a defective or damaged port. So, just try a different port on your TV to recognize the console. Usually, that is enough to help you with this situation. However, some users have had to take the TV to a repair center to get the port fixed.
- Change HDMI Cable
The most common reason behind Sylvania TV not detecting PS4 HDMI is a damaged HDMI cable, and you need to try a different HDMI when it is not connecting to the console. There is no point in trying to fix a damaged cable, and just getting a replacement is the only logical move in the long run. So, try out a different HDMI cable with your TV, and that should fix the situation with the TV not detecting HDMI.
- Check Resolution Configurations
Some users have also pointed out that this issue with the HDMI not detecting the console is related to the resolution configurations, and changing to a different resolution will usually address this situation.
Most of the time, the TV will present a pop-up menu from where you can modify the resolution to 1080p and then save these settings. That should fix the resolution issue, and you can also cycle through other resolution options depending upon the model of Sylvania TV installed in your house. Hopefully, the situation will be addressed at this point.
- It’s Time To Reset Your TV
If you’re not that lucky and the issue won’t go away even after trying out all of these fixes, then you need to reset your TV. There aren’t many other options that you can rely on when using the Sylvania TV, and going through the reset routine will get rid of all the existing configurations.
You will have to go through the initial setup from scratch, and it will take close to 20 minutes to get through the whole setup. However, there is a good chance that you won’t have to worry about the same HDMI issues when the cable is reconnected to the display.
- Call Sylvania Dealer
At this point, you might just have to call the Sylvania dealer to help with the issue. There are some hardware issues with your TV, and you can forward a warranty claim to get a new unit. If the claim is indeed valid, it should not be that hard to get a new piece within a few working days.
So, if your purchase was recent, just reach out to these experts and have them provide you with a replacement. They will help you address the issues on the spot, and if the issue is not fixable, you can demand a new unit for your home.