6 Things To Do If Sonos Beam Not Playing TV Sound

sonos beam not playing tv sound
sonos beam not playing tv sound

Sonos Beam sometimes faces connectivity issues, and you’ll see many customers complaining about the performance of this device. The most common issue with Sonos Beam is that it won’t play TV sound. You’ll be pretty annoyed when you’re in the same situation, where Sonos Beam doesn’t respond to any input from the TV.

The upside here is that all of these minor connectivity bugs are easy to fix. There are no extensive troubleshooting steps or methods involved, and you can just follow these methods to get the Sonos Beam working perfectly.

How to Fix Sonos Beam Not Playing TV Sound?

  1. Clean Ports

The condition of the ports and loose cable connection is the biggest reason behind Sonos Beam Not playing TV sound. So, if you’re stuck in the same situation and Sonos Beam won’t get input from your TV, just use an air blower to clean the ports. Make sure that there is no debris entrapped between the connection points, and then connect the cable firmly with the TV as well as the Sonos Beam. This should address the issue if there are no problems with the audio configuration.

  1. Go Over Audio Configurations

Issues with the Audio configurations can also play into Sonos Beam not playing TV sound, and you need to turn up the volume while also making sure that Sonos Beam is connected as the audio output unit. If the output is restricted through the Sonos Beam, you won’t be able to hear any audio. So, just update the audio configurations and try turning up the volume after changing the video clips currently queued on the TV.

  1. Get A Cable Replacement

A damaged or frayed cable will also cause a connection problem where the sound won’t come from the Sonos Beam. The only fix for a broken cable is to get it replaced immediately. You can reach out to the dealer to secure an original cable. Using off-brand options will only create more problems, and you won’t be able to get any output from the Sonos Beam. So, if your cable is in rough condition, then replacing it will fix the sound output problems from the Sonos Beam.

  1. Remove All Accessories

Sometimes, it is the third-party accessories that are creating this problem with Sonos Beam not playing TV sound. If you have many devices connected to your TV, then now might be a good time to remove them until the sound starts coming from your Sonos Beam. You should remove everything except the Sonos Beam unit from the TV and then try streaming audio through the Sonos Beam.

The third-party devices include all the consoles and the additional speakers that you’ve installed to improve the impressive experience brought forward by the Sonos Beam. There is a decent chance your TV will start streaming audio through the Sonos Beam without further issues after you remove extra devices.

  1. Power Cycle Your Devices

Minor connection bugs between the TV and the Sonos Beam can also be addressed by power cycling both devices. You can simply remove the power from your Sonos Beam as well as the TV for around 2 minutes and then turn them both back on. Make sure that all other devices are also removed, and Sonos Beam is the first unit to connect to your TV. Once both devices have fully booted up, you can test out the audio from the Sonos Beam.

  1. Reset Sonos Beam

At this stage, you should just reset the Sonos Beam by removing the power from the unit and holding down the play button as you resupply power. Keep on holding down on the play button until the LED lights on the Sonos beam start flashing. You should weight for the green light to let go of the play button, and then you can set up your unit from scratch.

It will take a bit of your time to reconfigure everything and pair up your Sonos Beam with the TV. However, resetting the device to factory settings addresses all minor issues with the device. So, there is a good chance that your issue with sound not coming from Sonos Beam will be addressed at this point if there are no hardware issues with your device.

Leave a Comment