The Awair units have proven to be pretty useful when it comes to exceptional units that provide you with increased control over the air quality. The data offered by this device, along with the contextualized details, will help you take appropriate action to improve the environment.
So, if you have a bit of budget to spare, then adding Awair to your smart system might be one of the best choices you can make. While this device is pretty consistent in updating users with the air quality monitors, you will sometimes struggle with the Awair connectivity to the local network. So, here are some possible solutions that can help you when Awair is not connecting to Wi-Fi.
Solutions For Awair Not Connecting to Wi-Fi
- Temporarily Remove Power from Awair
The best method that helped countless customers address this issue with the Awair system not connecting to Wi-Fi. All you have to do here is to unplug the Awair device for around 60 seconds and then re-plug it.
This will power cycle your Awair device and refresh the network connection between the router and the Awair system. If you’re just dealing with minor programming bugs and the positioning of your router and Awair system is optimal, then power cycling the system should be enough to address the connection bugs.
- Limit Distance Between Router & Awair
The distance between the Awair device and the router is the biggest reason why you might be running into this error. Depending upon the signal strength of your router, it is best to keep the Awair device less than 40 feet away from the router.
Otherwise, you will struggle with the connection, and the Awair unit won’t be able to access the network. So, just find a better spot for the Awair device that is close to the router, and that will help you with the system.
- Ensure That You’re on A 2.4 GHz Band
While the majority of units in the current market bring dual-band compatibility to the users, you need to make sure that the 5.0 GHz band is restricted when you’re connecting to Awair. Most owners use the same credentials for the 2.4 GHz and the 5.0 GHz channels, and this can create connection issues with the system.
So, you need to either turn off the 5.0 GHz channel or change the credentials for your 2.4 GHz channel. That will be enough to start your Awair system without further complications.
- Restart Your Router
Restarting the router is another effective method of refreshing the network connection. If you’re sure that none of the above-mentioned situations apply to your issue, then simply turn off the router for a few minutes.
After that, you can turn the router back on and check its connection with the Awair system. In most conditions, this will eliminate minor network bugs, and the router will connect to the Awair device without further complications. So, simply restart your router and connect it with the Awair system.
- Remove Interferences
The interference between the router and the main device will also create these connection problems. Ideally, there shouldn’t be too many wireless devices between the router and the Awair unit, and the devices connected to the router should also be limited. So, try to remove other devices from your router and limit the presence of other wireless units for a brief moment.
Once the Awair unit connects to the Wi-Fi, you can turn other devices on again, and that will be enough to address these connection issues. Moreover, you’ll notice an improvement in connection-related issues with the other devices.
- Reset Your Router
If the Awair unit is not connecting to Wi-Fi even after going through all of these fixes, then your best bet is to reset the router. This is an extensive task as you will have to reconfigure your whole smart system with the router again. However, if the issue is not addressed at this stage, then going forward with the reset procedure is your only option. So, simply reset the router and then check the response from the Awair unit.
Ideally, the issue should be fixed as soon as you limit the distance between your smart devices and restart the Awair system. However, if you’re unsuccessful in connecting the Awair system to Wi-Fi, then call someone from Awair support to help you out.