One of the main reasons why so many customers move towards Arlo systems is that these units provide perfect support for geofencing features. These features allow owners to better benefit from smart features without having to input any commands manually.
Moreover, this feature is not that hard to set up, and it will only take you a few minutes to manage. However, there have been a few repots where users were struggling with this feature.
If you browse through the community forums, there will be a few complaints about Arlo Geofencing not working. So, here are a few fixes that can help you through this situation with Arlo Geofencing not working with the existing smart system.
Troubleshooting Tips For Arlo Geofencing Not Working
- Check Status For Connected Devices
The geofencing features only engage when all the connected mobile units have left the household. Even if a single person is in the home and all other parties have left the premises, the features won’t kick in.
So, you need to either remove additional devices from your account or ensure that all connected devices are not present on the premises. This was the leading cause behind why so many users were running into geofencing issues, and you should also remove extra devices to avoid further complications.
- Go Over Location Features
Among other features, you need to make sure that the location settings on your mobile devices are enabled. If the location features are restricted, the geofencing commands won’t engage. So, you need to make sure that the location of your mobile device is being broadcasted at all times. Otherwise, it is not possible for the Arlo geofencing system to determine when you enter the geofencing range.
- Disable Battery Saver
The battery saver mode has a direct role to play in creating issues with the Geofencing features. Even if the battery levels on your mobile devices are low, it is not a smart idea to turn on the battery saver. This limits the access to location features, and the quality of connection deteriorates. So, you will keep running into performance bugs as long as the battery saver mode is active.
Luckily, all you need to do is to access the notification shade by swiping down and turning this feature off. It won’t take more than a few seconds, and you will notice a massive improvement in the geofencing features. So, just remove the battery saver mode and give the smart features one more shot.
- Improve Connection Speed
You need to further ensure that the cellular network is active at all times and the internet speed is decent. Otherwise, the location of your device won’t update, and you’ll be dealing with the same issues. Sometimes, it is a good idea to switch between network providers. Not all services work the same in every region, and you should pick the option that performs well closer to your house.
This will be a bit of an expense on your end, but it will pay dividends in the long run. So, try to imagine the bigger picture and improve the connection speed when you’re struggling with geofencing-related issues.
- Allow Notifications
It all boils down to the mobile configurations when you’re dealing with geofencing issues. While there is no harm in power cycling or resetting the Arlo system, your best bet is to still update the mobile configurations. Otherwise, you won’t be able to avoid the same geofencing-related problems.
So, make sure that the notifications are allowed, and the application has all the necessary permissions. You can open up the mobile settings and head over to the Arlo app info to check the notifications one more time.
- Remove Data Limits
Lastly, you have to remove all the data limits on your cellular service as they can stop the location of your device from updating in the app. So, you need to provide the app with complete data access without any interruptions.
Overall, these are some of the things that you need to consider when the Arlo geofencing is not working. You’ll be most likely dealing with configuration issues that can be resolved after a few modifications. So, mess around with different settings for location, data, and notifications to fix your geofencing features.