If you don’t like the idea of having to water your plants every single day, then B-Hyve is a great option that you can choose.
Through B-Hyve, you can easily water your plants on a schedule without needing to do anything on your end.
However, you can often run into problems when operating such devices.
The installation can is somewhat annoying when you’re using these units, and most owners prefer to rely on local contractors and other experts to get through the installation.
There are no other quick methods or easy routines that can be implemented here, and hiring an expert is the best option.
On the other hand, if you don’t mind going through a few troubleshooting methods while trying to save a bit of cash, then installing this system yourself is not a bad idea.
How to Fix Orbit B Hyve Won’t Turn On?
It all comes down to how much effort you’re willing to put into the system.
Regarding this, we have seen that the Orbit B Hyve won’t turn on for a few users.
In case you wish to learn how you can get rid of the problem as well, then here are the things that you will need to know:
- Checking the Power Outlet
The first thing that you should check if you aren’t getting out the output from your B-Hyve device is the power outlet.
There is a chance that your device isn’t getting any power, due to which it is having a hard time working.
To confirm if that is the case, you can try connecting any other appliance to the power outlet. If the appliance does not work, then we advise inspecting the power source itself.
It could be that a switch might have flipped on the circuit breaker.
Most of the time, the issue will be fixed right here, and you won’t have to go through any other fix.
So, just find errors in the power supply and make sure that the hardware is in good shape. Sometimes, the hardware can also get damaged during delivery.
Even if your unit is new, it can be damaged, and you have to check each section thoroughly.
From there, you need to further isolate the errors with the connections and then install a replacement by claiming the warranty.
- Power Cycle Your Device
Power cycling is another way you can troubleshoot your device. If you aren’t aware of what a power cycle does, it helps fully restart your device.
To do this, you will have to first disconnect the device from its power source and keep it turned off for 30-60 seconds.
As soon as time passes, you can then try reconnecting it to the power supply and turning it on.
- Resetting the Device
If power cycling did not help in your case, then you can try resetting the timer.
You should be able to din a gray ribbon cable located near the swing panel of your B-Hyve device.
You will simply have to unplug the ribbon cable from the power board and keep it this way for 10-15 seconds before you plug it back in.
This should be able to reset your B-Hyve device, after which it should be able to start working again.
- Checking the Wires
It is possible that the reason why your device isn’t turning on could have something to do with the wires of the device.
More specifically, your B-Hyve device might not have been installed correctly, due to which it is having a hard time turning on.
In such cases, it is highly recommended that you inspect each connection made to your smart sprinkler and the device.
Ensure that there isn’t any kind of broken connection or loose wire. Similarly, you can also try going through the whole installation process again.
- Try A Different Power Source
Sometimes, all you need is a different power source to get through this issue.
The problem is not always with the B-Hyve system, and you need to focus more on securing a consistent power supply to the unit.
So, be sure to check the power source as you try to isolate this issue.
If you’re inexperienced and don’t know how to use basic voltage measuring tools, then we suggest that you leave this job to the professionals.
It is too common for owners to electrocute themselves while trying to isolate the issue with this outlet.
So, if you’re in the same boat and can’t seem to isolate the issues, be sure to hire an expert.
He will be a bit heavy on your budget, but he will check all of the connections for you. From there, you won’t have to worry as much about voltage errors.
On the other hand, if you have a bit of experience with power connections, you can get through the setup yourself.
It won’t take you a lot of effort to inspect the voltage output. You can further confirm this error by trying a different outlet to figure out the issue.
It all comes down to how much money you’re willing to spend on managing the system.
So, if you’re not too sure about spending a bit of cash on hiring an expert, just fix the voltage output yourself.
Just make sure to be extra careful and wear insulting gear to avoid any issues in the future.
- You Might Just Have To Clean The Connections
Issues with the connection points can be especially annoying when you’re dealing with an older unit.
If you purchased this system from a secondary market, or the moisture is too much, you need to clean up the connection points.
This includes taking apart the system and then inspecting the connections.
It might take a while, but all you’re trying to do is look for corroded sections.
If you do find corrosion on these connections, then you need to remove power from the unit immediately. Most of the time, you can clean up this corrosion yourself.
You have two options here. Either you can rely on a cleaner from the market or switch over to a homemade solution with diluted vinegar.
Both of these positions will serve you well as you try to remove the rust from the connections.
Just be sure to be gentle with these connections and avoid damaging the unit.
Otherwise, you won’t be able to get through the issue by further damaging the connection points. So, take care of the corrosion and then tighten up the connection points.
From there, you just have to clean up the residue, and you’ll be all set. There are no other methods that you can use to get through these errors.
So, keep that in mind and try adjusting the system as you get through the power errors.
- Getting it Checked
If you are struggling with troubleshooting the issue on your own, then a much better approach would be to get in touch with a professional.
You can call in a technician and let him have a look at your B-Hyve device.
Similarly, after inspecting every possible reason why it may not be turning on, you should be able to get it repaired and fixed.
- Contacting Support
Alternatively, you can also try contacting the support team and inform them about the issue that you have been facing.
This way, they should be able to learn more about the reasons why you are getting this error, along with the things that you can do to get it fixed.
Just make sure to mention the things that you have already tried to troubleshoot the problem, which should help save time.
The Bottom Line:
Don’t have any idea why your B-Hyve won’t turn on? Most usually, a disconnection or an issue with the power source might be one of the main reasons why you will suddenly notice the device acting up.
However, if you wish to fix such issues, then you have to make sure that you follow all the instructions that have been mentioned in the article above.
All of these fixes can be implemented pretty easily to help you with optimal performance.
You just have to make sure that the hardware is in good shape and that there are no problems with the unit design.
From there, you can isolate issues with the wiring, check the connections, fix the voltage, and reset the system to get it working again.
It all comes down to the final hardware situation. You can’t rely on any fixes when the hardware is to blame.
So, if you’re in this situation as well and can’t seem to isolate the issue with the hardware, try calling the dealer.
He will help you forward a warranty claim that is usually valid for 12 months, and you’ll have a new device within the same week.
After a power outage, my timer face is continually flashing.. I unplugged the grey strap for a minute but it’s still flashing.