5 Most Common Marvin Door Lock Problems And Their Solutions

One of the many ways you can successfully secure your house is by purchasing the right lock doors. Although many brands offer various locks that can be used on doors and windows, Marvin is a solid choice that you can go for.

It might not be the best brand on the market, but the prices offered by this brand are hard to beat. That doesn’t mean that you’ll be compromising on the quality, but rather you’ll enjoy amazing value while sticking to a budget.

So, if you’re a bit short on cash, and need a quick upgrade to your home security, then going with Marvin door lock is not a bad choice.

The only thing you will have to be careful about is the installation. Missing a few steps here and there will only set you back. 

Speaking of which, if you already own a Marvin door lock, chances are that you may have encountered problems with it.

While these problems will require different ways you can troubleshoot these, this article will be focused on telling you some of the most common problems that you can run into. 

So, here is what you should know about these:

Common Marvin Door Lock Problems

1. Broken Door Lock

Even though these door locks are known to be durable, the locking mechanism can end up breaking. However, what makes this issue so annoying is that Marvin no longer gives any repairs to their products.

So, in case your lock breaks up, you won’t be able to get the company to fix the lock for you. However, this does not mean that your lock is beyond repair.

You should still be able to find plenty of professionals who are more than capable to fix the door lock.

With that said, if you find that someone was trying to break into your house, then there is a chance that the lock was damaged by an intruder.

You should immediately report this event to the local authorities and have them inspect the situation. 

There is no point in putting yourself at risk, and you should get the lock replaced immediately.

This is especially true if you live in a high-risk region with too many crimes in the vicinity. Just be sure to have the officials vet the place before you go back into the house.

Alternatively, you can also try getting in touch with the dealer from whom you bought the product in the first place. Apart from that, you can physically take your door lock to any local repair shop and have it fixed.

Either way, you need to leave this job to the professionals. Trying to fix the unit alone will only waste your time, and you won’t be able to get any consistency out of the unit. So, be sure to spare a few bucks and get to the local hardware store.

From there, you can seek expert help without having to spend a huge sum. Similarly, the warranty claim is always decent when you’re dealing with these established brands.

So, be sure to claim that as well, and you will have the new unit in no time.

2. Lock Stuck in Position

Another common problem that many users have reported facing with these locks, in particular, is that they won’t be able to lock/unlock the door.

More specifically, these users mentioned how the door lock is stuck at either one of these positions and won’t budge at all.

In case you end up running into the same problem, then we suggest you start by taking the handle off its place and taking a good look at it. 

There’s a good chance that the latch mechanism might have stripped or latched off. To take a look at it, you should inspect the rod and the lock mechanism attached to the door handle.

Sometimes, a quick adjustment is all that you need to fix the issue. You should just try to fix the alignment, and that will most likely be it, as you’re trying to get rid of the jam. However, it all comes down to the current hardware situation of the door lock. 

Depending on the damage, you may or may not be able to fix this on your own. Though if you don’t have any idea about what you are doing, we recommend calling a professional and having him inspect the door lock for you.

While there is no debate that you can start prying off the sections yourself pretty quickly, seeking help from a local expert will help you save the lock without damaging it. So, if you’re not planning on upgrading the lock, be sure to seek professional help.

3. Water Infiltration

The next thing that you will have to consider here is the water infiltration after rough weather. There is nothing more annoying than struggling with water infiltration issues, as it can damage the panel as well as the frame over time.

So, you will have to be quick to address these problems. If your unit is new, then you likely messed up the installation. That is a bit too common for first-time owners, and you will have to adjust the system accordingly by fixing the joints on the weather-strip. 

On the other hand, if your unit has been installed for a few years, then the weather strip has worn out. This is not that rare of a situation, and you will have to get the weather strip replaced.

There are no other methods or quick fixes that can help you in this situation.

4. Loose Panels

The situation with the loose panel can be just as annoying, and you will have to check on the condition of the retainers as well as the screws to isolate these issues.

Most of the time, you will have to just tighten up the connections and make sure that there are no cracks in the frame. 

However, if you’re sure that you followed all of the instructions carefully, now might be a good time to add a few more retainers. The issue can be a bit hard to manage at times, and you will have to struggle with a ton of errors in the long run.

So, we suggest that you hire an expert for this job. There is no point in going at the fix alone when you’re not even sure about the issue.

Hiring an expert will not only help you limit the hassle here, but you will also get a better response from the door lock. So, be sure to keep that in mind as you fix the situation.

5. Difficulty Turning the Thumb Latch

A common problem that users have mentioned facing in the past is the thumb latch being too difficult to turn in any direction.

To be more specific, users who were using the multipoint locking system had various problems with the thumb latch, which ruined the whole experience.

Unfortunately, issues like these completely depend on the kind of hardware that you are using, along with the doors themselves.

Certain doors seem to go well with particular hardware, due to which you will have to do a bit of homework before buying any door locks.

If you are looking to buy door locks, it is strongly advised that you have a door lock expert on your side, as he should be able to suggest what products you should go for.

So, if you’re new to the market, there is no gain in going at this alone. Instead, seeking help will help you avoid a lot of pitfalls down the road. 

Similarly, if you are already facing the latch issue, you can try getting it inspected, although this is how these locks are integrated, because of which there’s hardly a chance that you will be able to get it fixed.

The Bottom Line:

Experiencing problems with the Marvin door lock? Given the fact that Marvin no longer gives any repairs on their product, encountering any problem with them can be quite annoying to deal with.

Still, if you do face any issues with their door locks, we highly recommend going through the article written above.

Doing so should help you get a better idea of the things that you can try to troubleshoot these problems.

So, all you have to do is to give the article a thorough read! Hopefully, you’ll have a much better idea of how to manage this security system without dealing with the listed issues.

On the other hand, if you find the lock to be broken out of the box, then you need to call dealer support. There is no point in struggling with the lock at this point, and seeking official support will make your job much easier. 

If the issue is genuine, then the warranty claim will be pretty easy to forward. You will just have to provide proof of purchase to the dealer along with the details of the issue, and he will take over the situation.

From there, you should be able to get the new piece within the same week.