The Eight Sleep hub might be one of the more popular sleeping accessories on the market, but there is no deficiency of complaints on this unit. It is quite a struggle for homeowners to get consistent performance, and you will find many issues with the Eight Sleep Tracker IFTTT not working.
Luckily, there are some troubleshooting methods that can help you fix this situation with IFTTT not working. So, if you’re also not getting the desired performance from the Eight Sleep Tracker, follow these solutions.
Ways to Resolve Eight Sleep Tracker IFTTT Not Working
- Check Trigger Configurations on the Applet
Usually, owners are just dealing with configuration-related issues with the trigger, and they have to update the action settings through the applet. If you’ve not used IFTTT applets before, then there is a decent possibility that you’re in the same shoes. For these reasons, you should open up the applet and go over the trigger settings again. Make sure that the applet is linked properly with the device and that there are no discrepancies in the applet.
Make sure that the trigger phrase is correct and that there aren’t any input-related issues from your side. In the majority of situations, users were able to get around the issue with Eight Sleep Tracker IFTTT not working by changing the trigger phrase. So, make sure to give that a try as well.
- Verify Your Internet Connection
The placement of your internet router has a major role to play in Eight Sleep Tracker IFTTT not working. Even if you’re sure that the system was working perfectly when you linked the router with the Eight Sleep hub, it can run into problems if the router is placed more than 40 feet away from the bed. So, you need to find a new spot for the router and make sure that the Eight Sleep system is well within the range of the router.
Similarly, you should browse through the internet and check the connection speed. If the router has poor bandwidth, then upgrading the connection is the only solution, and you won’t get anywhere with the same network.
- Reconnect to IFTTT
The IFTTT service is not perfect and can run into a few bugs every now and then. So, you need to reconnect to the IFTTT service if you’re sure that the internet is in good condition and you’re using the trigger phrases perfectly. Luckily, this procedure is fairly quick and simple, and you should disconnect from this service and then connect to the IFTTT service once more.
- Reset Eight Sleep
This should be your last option, as resetting the Eight Sleep system will remove all the configurations. However, sometimes it is necessary to get your devices working with IFTTT. Eight Sleep is not known for its consistent performance, and resetting the device is your only solution if the issue remains after testing out all of the methods mentioned above.
After the reset, you can connect the Eight Sleep system with IFTTT service and check the command execution once more.