Led bulbs in ceiling fans have become really popular due to their brighter fixture, and efficient lighting. While there are plenty of other options for good lightning purposes, led bulbs have made their way through, as they are safer than traditional bulbs and cost-effective.
However, sometimes led bulbs not working in ceiling fans is a very common problem that most of the customers face. In this article, we will be discussing several ways how to troubleshoot the problem, just in case you are hit with the same issue.
How To Fix LED Bulbs Not Working In Ceiling Fan?
1. Checking the wattage:
The first thing that you can do when you encounter a certain problem is to check the wattage across the switch to which the ceiling fan is connected. In most of the cases when low or fluctuating wattage is running around the switch (usually an electrical fault), it distributes the wattage across the components so your fan might be working but your led bulb may not be receiving ample wattage to operate which can cause it to not lighten up
A stabilizer will work best for this purpose. It will ensure that the incoming wattage is steady and uniform.
2. Loosen bulbs:
After checking the wattage, if no issues are encountered you may move to the second step that is, checking the sockets in which the bulbs are screwed.
Ceiling fans rotate continuously which may assist in losing up the screw of the led bulb making it not functional. If this problem is encountered then it is recommended to tighten up the sockets of the led bulbs which might solve your problem. In most cases, at this step, you will troubleshoot the problem.
3. Broken pull chain:
Ceiling fans are commonly used in households and offices which means that they are operating almost all of the time. The heat generated by electricity is responsible for expanding and contracting the wires which may lead to damaged light sockets or in other cases; broken pull chains.
If this is the case, you need to repair the damaged wires using any method suitable and the led bulbs should start working.
4. Burned-out testing:
In most of the cases, the solutions listed above can be skipped to this step. You can also perform burned-out testing first-hand when you run into the issue. This will ensure the functionality of the led bulb component and eventually, will save you a lot of time and hustle. After checking, if no problem occurs, you can carry on with the listed steps.
Burned-out testing is a process in which you confirm the burning out of a bulb by testing it in a working lamp. This will assist in telling whether or not the light bulb should be replaced. If the bulb does not light in any other lamp this means that the led bulb is exhausted. You can buy a new led bulb of your choice and replace it in the socket of the ceiling fan.
5. Replacing light switch:
If none of the proposed possibilities occurs, then the final step that will ensure the working of the light bulb in a ceiling fan is replacing the light switch. This is relatively time-consuming and laborious work.
Ceiling fans usually have a mounting screw beneath the fan motor that can accommodate an optional light kit or in another case, can be replaced with new switches. When you come across this issue, all you have to do is disconnect the switch of the ceiling can so no current flows through it. Then, remove the light fixture and unscrew the screws which attach the fan t the assembly. A small switch will be visible. Remove the switch and replace it with a new one.
Led bulb issues in ceiling fans are a commonly reported problem. If you run into a malfunctioned led light bulb, it is best to troubleshoot. The above article clarifies all the necessary steps that should be considered to completely resolve the particular problem.