Smart lamps are one of the greatest ways how you can illuminate your table or bedside. Compared to an ordinary lamp, you have plenty more options that you can try.
However, you can often end up running into problems while using a smart appliance. Similarly, we have been receiving various complaints from users about their 3-way lamps not working. This is why today; we will be listing some of the most effective ways how you can troubleshoot the 3 Way Home lamp not working. So, without wasting any time further, let’s get right into it!
Fixing 3 Way Home Touch Lamp Not Working:
- Inspecting the Cord
One of the first things that you will need to check with your lamp is the cord. It could be that there is some sort of fault inside the cord of the lamp. If that is the case, then you will have to spot any potential damage that could cause the lamp to not work.
If you do notice anything out of the usual, then proceed with getting the cord of the lamp replaced.
- Check the Socket
Another thing that you can try is to try and plug in any different lamp. Alternatively, you can also try plugging in any different appliance. If it also fails to work, then it is highly likely that you have a faulty socket.
In that case, you should probably get the socket or outlet checked and replaced.
- Damaged Filament
A damaged or faulty filament can also cause all sorts of issues and make your bulb not work at all. This is why we recommend that you check the bulb as well. In case the filament is damaged, you will have to replace the whole light bulb.
It is worth mentioning that you will only get to have your CFL or LED bulb work if it is labeled as dimmable. The reason behind it is simply that a touch lamp does not support a non-dimmable CFL or LED bulb.
- Faulty Control Box
There’s also the chance that you have a completely faulty control box. IF that is so, then you will have to fully replace the control box with a working one. To get started with it, try unplugging the lamp and removing the light bulb.
In order to remove the housing of the lamp, get access to its base. You should now be able to see the dimmer switch and control box. Make sure that the wires are properly arranged. Now, if you do know for sure that your control box is not working, then simply replace it with a newer one.
- Faulty Lamp
If you haven’t had any luck in fixing the issue so far, then it is highly likely that your whole unit is faulty. In this case, there really isn’t much of anything that you can do. However, before you decide to just throw it away, we still recommend trying to get it repaired.
You can also try contacting support for any additional help on the lamp. But if the issue seems to persist, then we’re afraid that the only other thing that you can do is to get the whole lamp replaced. This will also cost you quite a few bucks.
The Bottom Line:
3 Way Home touch lamp not working? While there can be many reasons why you could be having the lamp not work at all, you will have to determine what exactly is causing the problem in the first place. Once you have rooted out the cause, you should have a much better time troubleshooting the issue.
Still, if you are having trouble with the troubleshooting part, then we have the right instructions for you mentioned right above! Be sure that you do give all these instructions a thorough read! Doing so should help you get the problem resolved in no time!