6 Approaches To Fixing Velux Skylight Blinds Not Working

While the Velux specialized blinds might not seem like a viable option, millions of satisfied customers have said good things about their practicality.

However, you need to only stick with the established brands and avoid the off-brand options if you wish to enjoy a consistent performance.

Aside from the convenience of controlling these blinds with the tap of a button, you get efficient motors that will last you for decades.

So, if you are looking for a one-time solution to all of your blind problems, then referring to this brand is your best bet.

The dealer support is the biggest plus when you’re engaging with Velux. So, when you run into any installation issue with their smart units, you’ll have complete purchase security.

Fixing Velux Skylight Blinds Not Working:

Even though there are a few reports on Velux Skylight blinds not working properly, the majority of these reports are because of installation problems.

So, there is no need to give too much thought to these issues, and the following list of troubleshooting methods will eliminate all of these problems.

1. Check Power

The issues with the Velux Skylight blinds not working are usually linked to power issues.

Owners don’t give much attention to maintaining the integrity of these connections and a lack of power to the device often leads to performance issues.

So, try to get yourself a multimeter to help you through the power issues. This meter will help you narrow down the voltage at the power connections, and you can match it with the unit requirements.

Once you’ve narrowed down on the defective components, replacing the battery should eliminate these power issues.

Just make sure that the connections are in perfect condition and the wiring is not damaged in any way.

However, if the connections are corroded due to high humidity or moisture, then you’ll have to do a bit of cleaning.

There are many great cleaners available on the market, and you can try some homemade solutions based on diluted vinegar.

Your main focus should be on streamlining the water connections and then installing a compatible battery to get through the performance issues.

From there, it won’t be that hard to isolate and fix the minor programming bugs.

2. Resync Remote

Issues with the Velux Skylight Blinds can often be linked to syncing issues with the control.

So, if the panels are not opening up perfectly, there is a good chance you’re in a similar situation. Luckily, a quick reset to the remote or resyncing windows should eliminate this problem.

The resync option appears immediately after you reset the controller. So, use the buttons on the remote to sync the maximum positions, and then try operating the blinds again.

They should open and close all the way without any further problems.

Make sure to also check the calibration of the blinds, as that can also interfere with their functionality.

So, after the reset, there is no harm in spending a few extra minutes trying to perfect the positioning. From there, it will be much easier to isolate and fix minor errors.

3. Remove Obstructions

Obstructions in the path of the blinds are one of the most common reasons why you might be running into this issue.

For this reason, most owners always prefer to hire a general contractor to help with the installation of these blinds.

If you’ve installed the blinds yourself and can’t seem to get them to work, then there is a good possibility that you’re dealing with excessive obstructions in the path of the blinds.

Just remove these obstructions, and your issue will be eliminated.

However, if you can’t seem to figure out the issue yourself and have to get through a lot of blinds, hiring a local contractor is not a bad idea.

These contractors are much more experienced and will get through the job in no time.

You will only have to spare a few bucks for their hiring fees, and the job will be done with better efficiency.

Moreover, you won’t have to deal with any calibration errors or functionality issues.

So, consider your budget and then think about hiring a contractor to get through this project. Hopefully, you won’t have to extend the budget by a huge margin.

4. Fix Seals

The condition of seals on your glass panes can also lead to issues with the functionality of the Skylight blinds.

Most of the time, you’ll get excessive moisture and condensation on the window, and it will be quite annoying to look through the filtered sunlight.

The only thing you can do here is to replace the seals between the glass panes.

Luckily, these seals are somewhat inexpensive, and you won’t have to spend any extra money to fix the performance of your Velux Skylight blinds.

Once the new seals are installed, you will notice a better and more consistent response from the blinds.

So, make sure to proceed with this replacement and limit the humidity levels in the room. Otherwise, you will have to purchase a replacement in no time.

You won’t have to go through any more fixes, and you can rely on these new seals to help you through minor functionality errors.

5. Reset Window 

If the problem persists with the Skylight blinds not working on the window, then resetting the window might be your best bet.

You can do so by manually opening up the window and blinds all the way. Once the window is open, use the reset button on the controller to reset the windows.

If the reset procedure is successful, the blinds will start moving, and you can go through the calibration of these blinds to get the desired performance.

Just make sure to sync up the extremes properly if you wish to avoid issues with blinds opening up half the way when you use the controller.

6. Call Velux

The Velux customer support is one of the best options for users running into any performance-related issues.

The professionals on this support team are quite responsive, and you will get immediate responses from these experts.

So, just call the company number and give a detailed description of the issue.

Once they have a clear picture of your blind’s problems, the support members will suggest some solutions that will be specific to your issue.

Hopefully, the issue will be fixed in no time, and you won’t have to deal with the same problem again.

On the other hand, if the issue persists, then the only thing left to do is claim the warranty.

Wrapping Up

These were some of the more common things that can be done when the blinds are not working.

The majority of the fixes are related to resetting the software and then power cycling the device. So, if you’re sure that there is no hardware damage to the unit, just proceed with the reset.

However, if there is hardware damage to the unit, then you’re quite unlucky. There are no quick methods or easy fixes to get through these situations.

Instead, you will have to take the unit to a local repair center or hire an expert. Either way, you need professional support to get through this issue.

There is simply no point in trying to spend hours of your time fixing the unit yourself. So, make sure to reach out, and the experts will take care of the rest.

This is especially true if you’re sitting on a valid warranty.

Usually, the warranty lasts for around 12 months. During this time, you can grab the fresh piece in no time.

So, make sure to reach out to these professionals, and they will guide you accordingly on how to fix the issue.

Hopefully, you will be able to grab a fresh piece from these experts, and you won’t ever run into these problems!