Resetting smart devices is one of the most effective methods of getting ahead of minor performance issues in the ecosystem. Depending upon the device you own, the reset procedure can vary, and users are advised to go through the owner’s manual to gain a better perspective on the reset process. So, if you’re in a situation where the smart devices are not functioning properly even though there are no power issues with the unit, then resetting these devices is the only viable option.
With that said, there have been a few questions on how to reset Cozylady LED lights. If you’re also interested in the same question and don’t know how to manage the LED lights, then the following details might help.
How To Reset Cozylady LED Lights?
You just need to follow a few basic steps to reset the Cozylady LED lights. It will only take a few seconds, and you can pair the controller back with the mobile application to access all the features. So, if you’re not getting the desired performance from your Cozylady LED lights, then this method should help you get ahead of these performance issues.
All you need to do to reset the Cozylady LED lights is hold down the power button on the main controller. Keep on holding down this button for around 15 seconds, and the LED light strips should start to flash. If you have the lights connected with the unit already, then it is a good idea to remove them from the mobile application before going through the reset process.
Once the lights have started flashing, you can open up the mobile application again and go through the parking process. All you need to do is access the smart application and then use the plus icon on the top right to add a new device to the application. After selecting the plus icon, select the relevant lights and make sure that you’re on a 2.4GHz network.
It will take a few seconds for the lights to connect to the smart app, and they should stop flashing after the parking process is complete. Now, you can browse through the extensive list of color options and accessibility features available on the application to further maximize the efficiency of these smart lights.
Some users have also pointed out that the color of the LED lights will switch to white when they are in pairing mode after the reset is complete. So, there is no need to get alarmed, and you just have to pair the LED lights with the mobile application to change the colors. Just make sure to select the right model of LED lights, and you won’t have to bother with any parking problems.
All in all, you just have to hold down the power button on the main controller to reset the Cozylady LED lights. It will usually take around 15 seconds for the lights to reset, and users are advised to remove the smart device from the mobile application beforehand. Otherwise, you’ll have to go through the reset procedure again, and the LED won’t start flashing.
Cozylady LED Lights Not Pairing?
If you’re running into pairing issues with the LED lights, then there is a good chance that you’re on the wrong channel bandwidth. Many users forget to switch the channel bandwidth to 2.4GHz, and the smart lights can’t connect to the 5.0GHz channel. So, you’ll need to switch the channel back to 2.4GHz and then go through the pairing process again. As long as you’re sure that there are no hardware issues with the lights, the parking problem will be fixed at this stage.
However, if you’re sure that the Wi-Fi network is on the 2.4GHz channel, then you can try your luck by resetting the application data and logging into your account again. You can further call customer support regarding this issue, and they will help you identify the cause behind this error with Cozylady LED lights not pairing.
So, make sure to involve an expert if you’re in possession of a valid warranty. Otherwise, you might have to spend money on a new LED light strip without any compensation from the dealer. Hopefully, this information helps you manage the lighting setup.