The water conservation features in some of the newer sprinkler systems justify their expensive price point. In the long run, you can save a lot of money if you have a massive garden. So, even though these smart sprinklers might seem expensive for now, they will prove to be the cheaper alternative in the long run. On the other hand, if you’re dealing with a smaller yard, then it is just better to stick with standard sprinklers when you don’t have the budget.
With that said, there have been a few queries on the Rachio Sprinkler system not working in all zones. If you’re struggling from a similar situation and don’t know why your sprinklers are not working, then the following solutions should help.
Rachio Sprinkler System Not Working In All Zones
- Fix Water Supply
If you’re not getting water from any zone even though the status on the application shows that the sprinklers are working, then you’re likely dealing with water supply issues. There is a good chance that the cut-off valve between the main water line and the sprinkler system is closed. So, you’ll have to get ahead of the power supply issues to get your system working again. Otherwise, you’ll get power in the unit, but no water will come out of the sprinklers.
All you need to do is open the cut-off valve and manage the pressure of water from the mainline. Once the water supply is streamlined to all zones, you won’t have to worry about the same issue again. With that said, damaged sections in the main valve, as well as debris stuck in the fittings, can lead to similar problems in your sprinkler system.
So, even if the valve is open, you should inspect the water pressure in the mainline. That will help you narrow down on the issue, and if the pressure is not optimal, then you’re likely dealing with leakages and broken sections.
- Check Wiring
Wiring issues in the controller can also lead to similar problems where all zones will become unresponsive, and you won’t see any power in the unit. To isolate this problem, you’ll have to make use of a multimeter on the wiring cluster. From frayed wires to the loose connection points, a variety of factors contribute to power issues in your controller. So, it will take a bit of time to fix this issue with the sprinkler system.
Similarly, shorting problems with the common wire in all zones will also negatively impact the functioning of your sprinklers. If you’re sure that the voltage in the wires is perfect, then you will have just to secure the loose connections, and the issue with sprinklers will be fixed. However, if there are some kinked or broken sections in the wiring, then you should replace them immediately.
Ideally, the issue should be fixed when you ensure power supply to the controller. So, make sure that the voltage flow and the wiring are always in top condition. Otherwise, you won’t see any water from the different water zones in your yard.
- Check Rain Sensor
A defective rain sensor can stop the system from running even when it is not raining outside. So, if the wiring and water supply are in perfect shape, then there is a good chance you’re in a similar situation before inspecting the main circuit board. You will likely find the rain sensor is defective and stopping water from coming through the valves.
You can either replace the rain sensor or remove it entirely from the system to get the desired performance. Otherwise, you won’t get any water from the different zones in your yard. So, make sure to remove the rain sensor if it is defective, and that should fix your issue.
All in all, these were a few solutions that can be used to fix the Rachio sprinkler system. You can also reach out to the experts working at customer support to further isolate the issue, and it will be easier to manage the performance of your sprinkler system. Otherwise, you will be spending hours trying to narrow down the exact reason behind this error with your sprinkler system. So, just call the company number and follow the instructions from a certified expert.