Even though Whirlpool fridges don’t have all the features when you compare them with Samsung and LG, these fridges are still very reliable and do a good job of consistently keeping your food preserved. These fridges are spacious and have a sleek design. So, if you were thinking of buying a new fridge, the Whirlpool smart fridge might be a good investment depending upon your needs.
Even though the reliability of these fridges is unmatched, you can still face some common issues from time to time. Luckily, they won’t cause you much headache and you’ll be able to fix them by going through a few steps. Here is how you can troubleshoot common issues with your Whirlpool fridge.
Common Whirlpool Smart Fridge Problems Troubleshooting
- Panel Not Responding
Customers stated that sometimes the panel will malfunction and they won’t be able to access the controls of their fridge. A power cut can usually cause your fridge to behave like this so if the controls on your Whirlpool smart fridge are also malfunctioning then try following these steps to fix the panel.
If the control panel is not working even though you’ve confirmed the PO error then you need to reset the fridge to get the controls working again. You can find the procedure on the owner’s manual if you’re not sure how to reset your fridge. You can also try power cycling the device by unplugging the fridge from the power source for 15 minutes and then plugging it back in. Hopefully, the control panel will start working properly when you reset the power to your fridge.
However, if you still can’t get the controls to work then it is recommended that customers reach out to Whirlpool support. There might be some internal damage and you need a professional to help you figure out the issue. Schedule a service session by contacting the company number and you will be able to figure out the issue with your controls.
- Noise Problem
Users also mentioned noise issues with their Whirlpool fridges. Different types of noise issues were reported ranging from buzzing noises to clicking noise coming from the smart fridge. If you’re also getting excessive noise from your fridge then here are a few things that you might have to do to fix the noise issues.
Usually, the source of this buzzing noise is the water valve that you’ve connected with the fridge. Users that have the ice dispenser turned on but don’t have a water valve connected to the fridge then is why you keep hearing the buzzing noise. You will need to either install a water supply in line with your smart fridge or turn off the ice dispenser altogether. That will take care of any excessive noise coming from the fridge.
However, if your fridge is beeping then you will need to check your panel to see if something is wrong with the fridge. The beeping system is there to inform users about the power outages as well as when someone forgets to close the fridge door. So, the fridge will remind you and you can shut the door properly to fix the beeping issues. Make sure to check the seals if the beeping doesn’t stop after shutting the doors.
- Clumped Ice
Some users also complained about the ice dispenser not working properly. The majority of users mentioned issues with clumped ice which gets stuck in the ice bucket and causes the dispenser to malfunction. To get around this issue you will need to first check the temperature of the freezing compartment. If the temperature is not low enough then the ice would start clumping together. Make sure to lower the temperature of your freezing unit to fix this issue.
You need to also ensure that you clean out the ice bin after regular intervals. Sometimes, if the dispenser has not been utilized in a long time, then you can have issues like clumped ice. Make sure to take a few cups of ice out of your dispenser regularly to avoid issues with the ice dispenser. Hopefully, that will allow you to fix your clumping issue. If you need assistance with any other issue then make sure to reach out to Whirlpool service and a professional will help you resolve any issue that you might have with their product.