Even though you can buy cheap smart plugs from different online stores, it is always better to buy a reliable device like an Amazon Smart plug.
You will get amazing value from these options and won’t feel the need to change for years.
Mainly because of the safety precautions that are ignored in these cheap products.
Aside from the safety feature, the Amazon smart plug is very easy to set up, and you can use voice commands after pairing the plug with Alexa.
The best thing here is that the setup is effortless, and you will not have to deal with any extensive errors.
It will take less than 10 minutes to get through all of the configurations, and you can go about using the system accordingly.
The LED indicator on the plug informs you if there are any issues with the plug. So, if your Amazon Smart Plug is blinking red, then here is what you need to do to fix that.
Amazon Smart Plug Blinking Red
- Power Cycle
If the LED indicator on your Amazon Smart plug is blinking red, then that means there are some complications with the connection of the smart plug to Alexa.
Usually, it is just a minor error that you can get around pretty easily. Try removing the smart plug from the power source and wait for a few seconds.
Plug the smart plug back in and check if the LED indicator is still flashing or not. If there are no serious issues with your smart plug, then it will connect with Alexa without any issues at this point.
So, just try the power cycle method to flix the LED indicator.
Hopefully, you will be sorted out right here and won’t have to deal with more fixes.
The right light will only present itself when the issue is with the communication, and you have to make sure that the minor programming bugs are addressed properly.
Instead of directly resetting the system, you should always start by power cycling the unit.
It will not take up as much of your time, and you still have a decent shot at fixing the issue. So, be sure to follow along with these fixes when you’re stuck.
- Check For Power Issues
At this point, you should just check the outlet for issues.
If you’re sure that the system was paired up correctly and that there are no issues with the router connection, then you have to check up on the power supply.
The issue with the power supply is pretty hard to manage.
So, if you’re in a situation where you haven’t gotten the chance to get the power connections serviced this year, then now might be a good time to do so.
Try hiring an expert to take a peek at the power connection and service them accordingly.
Hiring an expert to fix the power connections once every six months will make your life much easier, and you will not have to bother with these errors
Once the power supply to the smart plug is managed properly, you will not have to deal with more errors in the future.
Just make sure to follow along by hiring a local technician and he will help you avoid a ton of errors down the road.
- Go Through The Pairing Routine
Sometimes, all that you have to do is to go through the pairing routine.
When you’re stuck in these errors, it is a good idea to reach out to the experts and have them guide you through the issue. That way, you will be able to navigate through these errors in no time.
The red light will present itself when the Alexa unit can’t connect to the plug, and you have to make sure that the connection is not interrupted.
Try scanning the barcode through the app and then check up on the performance of the plug one more time.
The Alexa system will detect your smart plug, and you can also focus on limiting the interference from other wireless units.
So, if you’re stuck in these errors, it is a good idea to reach out to the experts, and you will be sorted out in no time
All that you have to do is to launch the app, go to devices, click the plus icon, and then add the smart plug.
It will be more than enough to have you sorted out, and the red light should disappear once you’re through with the pairing routine.
- Update Smart Application
Updating the smart application is the next thing that you need to do when you’re stuck in these errors.
When you can’t seem to get a response from the pairing routine, and the system won’t connect, there is a good chance that something is wrong with the smart plug.
The only reasonable thing that you can do about this situation is to reinstall the app or update to the latest version.
There are no quick fixes here, and you have to make sure that the plug is discovered by the app. Otherwise, you’ll be running into more errors down the road.
Hopefully, you will be sorted out in no time and making use of the smart application will come easily to you.
It all comes down to the spring routine, and you have to make sure that the plug is paired up perfectly with the Alexa system.
- Factory Settings
If your issues were not fixed by power cycling the smart plug and it is still blinking red after you plugged it into an outlet, then you can try resetting the smart plug and then pairing it again with Alexa.
The reset procedures include holding down the button located on the smart plug for 15 seconds and then releasing the button once you notice the LED indicator go off.
The red light on the LED indicator will switch to blue, and the reset procedure will be complete.
At this stage, you can now open up the Alexa application and then try pairing the smart bulb with the Alexa app.
Make sure to update the application before trying to add in the new device, and that should help you fix the connection error with the smart plug.
- Damaged Plug
If you can’t get it to connect, then try refreshing the network connection by pairing your smart plug with the router again.
However, if the problem still exists after you reset the smart plug to factory settings, then the smart plug may be damaged, in which situation you will need to get it replaced.
Before you ask your suppliers for a replacement, you can contact Amazon support for assistance.
They can also recommend some troubleshooting steps that can potentially help you avoid the hassle of replacing the smart plug.
So, there is no need to wait, and you can reach out to the experts working on the support channel.
Amazon support is one of the best on the market, and we will be more than happy to help you out.
All that you have to do is to explain your end and then have the dealer guide you through the rest. That will be more than enough, and you will not have to deal with more errors on your own.
For most users, the issue was fixed when they reset the smart plug to the factory setting.
Hopefully, you will be able to get to the same outcome without having to deal with more errors down the road.
So, you need to ensure that you go through the procedure properly, and you can follow the instructions in the manual for further clarification if you’re confused.
Hopefully, the red light on your indicator will stop blinking, and you will be able to get the plug working again.
Wrapping Up
Struggling with the Amazon smart plug blinking red? Here are some of the most viable and effective methods that will help you fix the situation right here.
Hopefully, you will not have to worry about any extensive routines or setup cycles when it comes to addressing these errors.
It will not take that much effort on your end to limit these errors. Just go through the basic methods, including power cycling the unit, refreshing the programming, and resetting the plug.
That will have you shouted out ninety percent of the time.
With that said, some owners do mention issues with the hardware. That situation can be a lot more than annoying, and you will have to go about forwarding the warranty claim.
You will not be able to fix these errors on your own and will have to rely on the officials to guide you through these errors.
The good thing here is that the warranty status on these units is phenomenal.
You will not have to deal with any extensive errors, and simply explaining the issue to the officials will have you sorted out in no time. So, be sure to contact the dealer, and he will help you get a fresh piece.