9 Fixes For Geeni Camera Constructing Encryption Channel Failed Error

Not only has smart home technology made our lives easier, but it has also helped in making our lives more secure than ever.

Now, we don’t have to worry too much about security as smart technology has improved, and monitoring devices can be installed in our house, giving us more security options.

Brands like Geeni and Wyze have been dominating this home security sector with some of the most decent models on the market. Furthermore, customers can stick to a reasonable budget when purchasing Geeni units.

These devices bring reasonable performance to your smart setup with a few complaints here and there. Most customers have had an amazing time with the Geeni camera, but some users did have negative remarks about the device. 

So, keep that in mind if you do choose to go with the Geeni unis over options like Wyze. Saving money should never be your only data point, and the overall value is what ultimately dictates the purchase decision.

How to Fix Geeni Camera Constructing Encryption Channel Failed?

A really common error that many users seem to be experiencing with the Geeni camera is “Geeni camera constructing encryption failed.” Due to this error, they are unable to properly use their device.

If you are also experiencing a similar error, then this article should prove to be quite effective in your case. In this article, we will be explaining all the different ways how one can troubleshoot the error for good.

So, let’s get right into the troubleshooting procedure!

1. Check Your Internet Connection

For those of you who don’t know why this error occurs, it is most usually due to issues with the network connection of the device. This is why the very first thing we recommend you do is check the internet connection and its quality before trying other fixes.

Sometimes, a quick reboot is not a bad option here. If you’re sure that the network configurations are optimal, a quick reboot will mostly do the trick.

So, just remove the power from the router and turn it on one more time. You should notice connection improvement after this point.

You will need to further check whether your router’s Wi-Fi band or frequency is set to 2.4GHz as the device does not seem to fully support 5GHz.

Similarly, you will also need to check whether you have enabled WPA/WPA2 mode as well as the DHCP function.

Lastly, also ensure that you have disabled wireless access control. Some users also pointed out that changing credentials helped them through this error.

So, simply update the username and password, and make sure not to use any special characters. That should be enough to address network errors.

2. Check Your Phone

Another thing that you will need to check is the phone that you are currently using. It could be that your phone does not fully support the application.

In this case, you can try using another device which should help in determining whether this really is the reason behind the error or not.

Likewise, you will also have to check the version of the OS that is installed on your phone. The issue could simply be due to you having an older version of software installed on your phone.

3. Change Your Wi-Fi Range

Alternatively, we also recommend that you check whether your router is not placed too far away, which could also potentially lead to this issue. The router should be within the 20 ft range even when you’re using a decent device. 

The system won’t be able to connect to the router when there are thick walls between the devices. So, it is a good idea to check the alignment and further isolate the issue to the Wi-Fi range from your device.

4. Use A Different Network

At this stage, the smart thing to do is to make use of a different network router.  If you’re sure that your device is in good shape, then changing the router connection will help you figure out the exact issue.

If changing the router does fix this situation, then you will be sure that the issue was with the router and not your device. On the other hand, if the problem persists, then you need to either reset the device or go through with the power cycling method.

5. Try Power Cycling the Camera

The power cycling method might seem basic, but you’re not left with many options at this stage. It can take a few minutes for the camera to boot up, and power cycling the device will take care of the majority of these programming bugs.

Ideally, that will be enough to address this situation.

You just have to remove all power connections and then let the device remain in the dead state for around 10 minutes. From there, turn the power back on and wait for the device to boot up before you pair it again with your home network.

6. Limit 5.0 GHz Network

While there is no debate that dual-band routers are superior to your standard units, you might still need to remove the 5.0 GHz band to make it easier for the device to connect to the 2.4 GHz network.

This is one of the most common issues with the dual-band router, where these machines will project both channel bands under the same credentials.

These same credentials can be hard to differentiate, and you will need to remove the 5.0 GHz network to ensure connection to your router.

Once the connection has been established with the router, you are free to turn on the 2.4 GHz network. This will be enough to streamline the network errors, and you won’t have to deal with the same encryption issues again.

7. Check For Hardware Issues

The hardware issues are usually pretty serious, and you need to carefully inspect the whole system to narrow down the issue. If the usage is a bit rough, and there are some cracks on the camera, it might be time to get a replacement.

If you’re sure that you didn’t damage the device yourself and it was in rough shape when you got this unit out of the mail, then you can claim the warranty from the official support team or the Geeni dealer.

If the claim is genuine, you won’t have to worry about a thing. The dealer support is pretty decent when you’re using Geeni products, and you can grab a fresh piece in no time.

8. Factory Reset Your Device

While factory resetting the device is not always the right move, there aren’t many options left for you. If you’re sure that the hardware is in good shape and the problem is only related to the programming side of things, then a quick factory reset will do the trick.

You can rely on the owner’s manual to get through the reset routine. It will take a while to set up the unit one more time. However, you will be sure that the problem is not related to the software after the reset is complete.

This should be your last option, as resetting the device will get rid of all configurations from the connected units. You will have to integrate this device from scratch, and that can take a fair bit of your time.

9. Seek Help from Official Support

The Geeni customer care service is pretty reliable and will help you narrow down the issue in no time. So, provide complete details of the issue and seek their assistance on how to fix these encryption errors.

It is a good idea to also brief them about all the troubleshooting steps you’ve tried so far. That way, you won’t have to waste any time going through the same fixes that you’ve tried already.

So, be efficient with your time, and bring these professionals up to speed. 

Once they have a clear understanding of the error, they will guide you through each step of the troubleshooting process. Hopefully, you won’t have to worry about much once the connection errors are addressed.

The Bottom Line

Are you facing the error “Geeni camera constructing encryption channel failed?”. If so, then all you have to do is to follow the guidelines that we have mentioned in the article.

In case this does not solve your issue, then the last option would be to contact the support team, as they should help you further troubleshoot the issue.

Most of the time, the main issue is not that serious and can be addressed by power cycling the device.

So, if you’re stuck in this situation, start by fixing the network connection. A security unit is only as good as the network you have maintained in your house.

If the issue is with the network side and you believe your device to be in optimal shape, just reach out to your service provider. Explain the issue with the router, and they will guide you accordingly on how you can address these errors.