SimpliSafe is an American company that offers home security solutions to its customers. The company is located in Boston. They manufacture and sell wireless security systems that are very easily installed on your smart home. All of the security systems are connected to a central monitoring center.
You can buy a variety of devices from SimpliSafe, each aimed at making your smart home a secure place to live in. What’s more, is that you will have a monitoring staff who will let you know as soon as they find something out of order.
What Should You Do When SimpliSafe Sensors Keep Falling Off?
The SimpliSafe motion sensors are installed in your house at different locations. They are attached to the surface through tape. The sensors were slightly changed over the years with the 3rd generation being the latest one. Although it is bound to be an improvement over its predecessor, there have been some complaints about them.
One of the most common complaints about the motion sensor was how they made its tape really cheap. This is the reason why you may also find your motion sensor fall off a lot more than it should.
But you don’t need to worry much as we will be explaining everything you need to know about this problem and what you can do in order to prevent it.
Why Do the Sensors Fall Off?
This is an issue that is particular to the 3rd generation. A big reason for this is because they have completely changed the type of tape that they use to stick on the surface. Users that are currently using the 1st generation of sensors haven’t had any issues even after using the sensor for years.
What You Can Do to Avoid the Sensors from Falling?
Fortunately, there are some precautions that can help you improve the adhesive tape that is used to stick on that surface. These are all mentioned below:
- Clean Off the Surface Before Attaching the Sensor
One thing you absolutely need to make sure is that you clean the surface before trying to attach the sensor. Attaching the sensor without cleaning the surface may result in something interfering with the adhesive properties of the tape.
- Make Sure the Tape Is Not Under Direct Sunlight
You may know this beforehand but if you place the sensor under direct sunlight, the tape may not attach to the surface. This is because the adhesive properties of the tape don’t really work well when under sunlight. This is why you better try moving the sensor someplace else.
- Get a Nano Tape
This is by far the most reliable way on how you can overcome this problem. You will need to simply buy a new tape. We recommend you go for the nano tape as it is double-sided and is reusable.
Conclusion
This article contains all the details that you will need in order to prevent SimpliSafe Sensors from falling off. We highly suggest you give it a good read.