iRobot Braava Jet M6 might just be one of the best robot mops on the market. As long as you’re following all the instructions mentioned in the owner’s manual, you won’t have to worry about any hardware or performance issues. So, keep that in mind and try to go through the manual. Otherwise, you will have to spend hours trying to narrow down issues like iRobot Braava Jet M6 leaving streaks.
The upside here is that these issues are usually not that serious. If the hardware is in good shape, you won’t have to go through a ton of troubleshooting methods. Just following some of these solutions should help you through the issue.
Fixing iRobot Braava Jet M6 Leaving Streaks:
- Reduce Spray Amount
The most consistent fix that helped owners get ahead of these streak issues was to reduce the spray amount. So, if you’re stuck in the same situation, just slightly reduce the amount of spray, and that will help you enjoy a better cleaning performance. Once the spray amount is reduced, the solution will dry up quickly, and the dirty streaks won’t appear behind the robot.
- Try A Different Solution
Sometimes, it is not the spray amount but rather the type of solution you’re using in the cleaning robot. If you’re not using the recommended solution and trying to save money on cheaper options, then that is likely why you won’t be able to get consistent cleaning performance from your unit. So, simply try a different solution and then check the response from your device.
Aside from helping you with streak issues, a cheap cleaning solution can potentially reduce the lifespan of your device. So, to address this situation, make sure to try out a different solution from a reputed brand. That way, you won’t have to deal with either one of these issues.
- Make Sure The Floor Is Vacuumed First
While the concept of a robot mop is pretty great, you will still have to vacuum the floor first to get rid of excessive dirt on the floor. Most of the customers like to pair up the Braava Jet with cleaning robots like Roomba to first vacuum the floor and then mop up the region to make it look better.
However, if you skip the vacuuming part, there is no way you can get rid of the dirty streaks. So, keep that in mind and get a new robot vacuum to help automate the cleaning cycles.
- It’s Time For A Pad Replacement
The pad replacement is the next thing that you need to do pretty frequently. Depending upon the usage of the cleaning robot, it is a good idea to cycle through new pads every few weeks. These pads are not that expensive, and you will enjoy much better performance with a new pad.
So, if you’ve not changed the pad in a few months, then that is likely why you can’t get rid of the dirty streaks. All you need to do here is to install a replacement or clean the current pad. Make sure that the pad is completely dry before you install it on the cleaning robot again. Otherwise, you will get the same dirty streaks due to the damp pad that has soaked up dirty water or solution.
- Try Cleaning Your Braava Jet
At this point, it is a good idea to simply check for leaking issues and make sure that the wheels are clean. There is nothing wrong with cleaning or servicing the unit every week, and the streak can also be caused by something stuck in the wheels. So, turn over the cleaning robot and then remove all the clogged hair and debris. From there, just engage the cleaning cycle, and that would be it when it comes to iRobot Braava Jet M6.
- Call Customer Care
You can also choose to reach out to the official customer support, and they will make it much easier to narrow down on the problem. If you’ve not been able to fix the issue yourself, then there is no point in spending more time trying to figure out the issue. Just reach out to the official support members, and they will make the troubleshooting process much easier.