When it comes to precision, there isn’t a thermostat on the market that can beat a 3M Filtrete unit within the same price range. The smart features and the battery management aren’t too great with this unit, but as far as the basic features are concerned, the Filtrete thermostat is a viable option for you.
Most of the users have had an amazing experience with this thermostat, and the only complaints regarding the 3M Filtrete thermostat were related to the touch screen not working. This issue is usually caused by an insufficient power supply to the unit, and here are some solutions to help you if you’re stuck in a similar situation.
3M Filtrete Thermostat Touch Screen Not Working:
- Power Cycle Your Thermostat
In any case, you should just power cycle the thermostat and then check the response from the display. All you have to do is to remove power from the unit for a few minutes and then turn the thermostat back on. If you’re sure that the batteries are in good condition, that should be enough to fix the display. Hopefully, you won’t have to spend more time trying to fix the display, and it will start working properly at this point.
- Check Connection Points
It is also possible that the battery connection points are damaged, due to which your unit is not able to get any power. So, if the display won’t power up even after you power cycle the device, just check the orientation of the battery relative to the connection points. There shouldn’t be any obstructions or dirt build-up blocking the connection, and then you can test out the display one more time.
- Get A New Battery
The battery might also be at fault when the display is not powering up. Almost all the reports with a faulty display showed that the batteries weren’t compatible with the thermostat. So, if you’ve recently changed the batteries in your unit, it might be a good idea to check their compatibility. The batteries are not that expensive, and you need high-quality batteries to get the thermostat working perfectly.
- Check For Hardware Issues
At this point, the issue might just be related to hardware damage to the unit, and you should thoroughly inspect the thermostat. If the display is in rough condition, there isn’t much that you can do about fixing the device yourself. Try taking your unit to the nearest repair center if the warranty has expired, and you just might get the unit fixed. However, chances are slim when the display is damaged, and you’ll have to spend a decent chunk of your budget to get a new unit.
- Reset Your Thermostat
If you’re sure that the display is in good shape and the issue is related to the programming of the unit, then a factory reset is in order. Factory resetting the thermostat will wipe away all the configurations as well as the user information from the unit, and you’ll have to go through each set from the beginning. It can take up some of your time to set up this device from the start, but there aren’t any other solutions when it comes to programming bugs.
So, go through with the reset routine and then test out the display one more time. If there are no hardware issues and the batteries are in fresh condition, the unit display should turn on at this point. Otherwise, you’ll be sure that you have a defective thermostat that has to be replaced by the dealer.
- Claim Warranty
When the thermostat is defective, the only logical solution is to seek help from a professional. He will help guide you through each step of the troubleshooting process, and you won’t have to work as hard trying to find the main cause behind the 3M Filtrete thermostat screen not working properly. So, make sure to ask the dealer and demand a replacement if the unit is genuinely defective.
Overall, the majority of users just had to change the batteries and clean up the connection points to get the display working again. So, your main focus should be on streamlining the power connections before moving towards other troubleshooting steps mentioned here. Hopefully, it won’t take you more than five minutes to get the display back.